Nokia 1202 1203 LCD Repair

Hello friends, after a long time I did not post a trick jumpers, now Im back to share a trick jumpers that may be useful for you. Jumper trick this time is to repair the broken lines on the LCD Nokia 1202 and Nokia 1203.
Please save this images as your reference material if someday you find a problem on LCD Nokia 1202 and Nokia 1203.

Nokia 8310 Mic Problem

the information we give this time is the information about the Nokia 8310. On the Nokia 8310 mobile phone is often a problem occurs in Microphone.

Problems with microphone can be caused by a broken line or a broken microphone. However, these days we have received 3 pieces Nokia 8310 mobile phone. Complaint is when to call, our voice was not heard by the other person.
At first we thought that the microphone is broken, but after we checked, still a good microphone. The next step we check the microphone channels, the result no broken lines.
It turned out after our study, the damage caused by installing the bolts on the mobile cracked bone, so that when we tighten the bolts, the PCB board is not attached properly due to loose bolts. This causes the connection between the microphone with the PCB board to be not perfect.
To fix this, replace bone or you can provide the lead on the microphone on the PCB. This is a simple step but provides a real solution.

Iphone 3g ringer ways

Iphone 3g ringer ways

Nokia 6303c Low battery after whitescreen

Nokia 6303c Low battery after whitescreen

How to install downloaded applications in Windows Phone 8 1 Store

With the arrival of Windows Phone 8, I get a method by which we could install applications on our phone from SD card.

Thus, we could save the download application using mobile and space involved in the memory of the phone during installation.

But only apps downloaded from the Windows Phone Store, and maintaining connection to the store because it was checking if we had permission to install it.

Yes, all holders of a terminal that does not have SD card, could not make that method.

With Windows Phone 8.1 , the possibilities have increased and it is now possible:

• Install applications on SD card through our terminal to save space on the phone memory.
• Move installed to SD card or SD card applications being able to free up the phone and installed applications.

But can we still install downloaded from Windows Phone Store applications? Well the answer is yes, and that point has also improved. Now not only the owners of an SD card terminal can perform the installation , but also those with only internal storage.

To do this, simply copy the downloaded file to the root of the phone or the root directory of the SD card.

Once youve copied the file, well go to the Windows Phone Store.

Click on options and see an option that had previously not now appears to install local applications. If we click on it we get a list of applications and is compatible and can install it we can select.

It is a good method if we unloaded a heavy application as it can be a game in hand even gigas and we have to install it on multiple terminals. Now available even without SD card terminals. Of course, we can only install applications we can install from the store itself .

Sony Ericsson K700 Hang Solution

Sony Ericsson K700 Hang Problem Solution

Nokia C3 00 Earpiece Solution Ways

Nokia C3-00 Speaker Not Working

samsung s5360 hard reset code

how to hard reset myの mobile phone

 Galaxy のYoung

Press Volume UP +  HOME 

key + POWER on the phone

 (or Press Volume UP + MENU + POWER on.)

 Select のwipe data / Factory reset andの confirm.

nokia n8 charging ways

nokia n8 charging ways 

nokia n8 charging part 

nokia n8 charging solution 

nokia n8 no charging  

How to receive pictures by text message on HTC Droid

The HTC Droid Incredible is integrated with the Android smartphone operating system . In addition to various functions of software and hardware, has a high capacity usage data , which enables you to access the Internet, check your email and take advantage of MMS services. An MMS message is a message with an attached media and if you get one with a picture attached , you see it or download it easily just now.How to receive pictures by text message on HTC Droid

1. Go to the " Start" Lcd, press the button that says "Start " button below the Lcd with the image of a house.
2. Click " Applications" in the lower left corner of the Lcd and select " Messages" .
3. Tap the message to open MMS .
4. You can view or download the attachment. To view simply click the attachment and wait a minute. To download on your storage card, press and hold the name or number of the sender to display the options for that message. Click " Save [ attachment type ] " and after downloading the attachments , you can see them in the "Gallery " application .

Tips and Warnings

• If you have your Droid Incredible configured to automatically notify you when you arrive and MMS text messages , you can open the message directly instead of locating in the tray of "messages " . The notification icon appears in the status bar at the top of the Lcd. Just press the status bar and swipe down the Lcd, then tap the notification to open the message .
• To view or download attachments you use your phone s data plan. You can always see the size of the attachment on the MMS message before really download it.

Nokia 3110C earphone speaker way

Nokia 3110C earphone speaker way

iPhone 3G Wi Fi Not Working Problem Repair Solution

iPhone 3G Wi-Fi Not Working Problem Repair Solution

iPhone 3G Wi-Fi Not Working Problem Repairing

iPhone 3G Wi-Fi Not Working Problem

Motorola v3 charging ways

Motorola v3 charging ways

Nokia 3230 Joy stick

kia 3230 Joy stick

nokia n82 power on off button switch jumper ways

Heres the alternative way to apply jumper when the power switch solder terminal pads is being damaged on Nokia N82.
Just follow and trace the line paths shown on the solution below.

Nokia N82 power ON OFF button Switch Jumper Ways

Just trace and apply a tiniest magnetic jumper wire on the spots shown of the above solution.

Nokia 1661 Mic Problem

Nokia 1661 Mic Problem

Nokia C2 00 Charging No Response Solution

Nokia C2 00 Charging No Response Solution

Vodafone India General GPRS MMS WAP Manual Settings

Andhra Pradesh & Karnataka Vodafone GPRS Settings
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
Tamil Nadu State Vodafone GPRS Settings

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9201
Data Bearer: Packet Data

Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)

Vodafone GPRS Settings for China Mobiles
To enter settings in the Chinese mobiles used in India, here is how you need to do it -
Go to Menu > Services > WAP > Settings
In the settings, select a profile and select “Edit Profile”

Here you need to make the following changes -
Profile name rename: Vodafone_gprs
Homepage: http://live.vodafone.in/
Data Account: Vodafone_gprs
Connection type: In all the 3 options, the IP address should be 010.010.001.100
Usually the proxy port to be used is 9401, but you need to confirm the proxy port from your mobile network and this depends on your location.

Below WAP, there is a Data Account where you need to make a few changes:
GPRS Settings edit:
1. Account Name: Vodafone_gprs
2. APN: portalnmms
3. Username: (Leave it Blank)
4. Password: (Leave it Blank)
5. Auth. Type: Normal

More info :
As we have shared the info only about Andhra Pradesh, Karnataka and Tamil Nadu you can enter the same details for any state, but the only problem would be the proxy port which is different for every state usually. You can confirm this and get the Proxy port information by calling the customer care (111 for Vodafone).
For any settings you change, you need to restart the phone and then try browsing the internet as the settings saved get activated after the phone is restarted once.
If the device is not recognized by your carrier and the settings don’t work, you should once remove the SIM card from the device, reinsert it and then call the customer care to confirm whether the device is recognized. If not, you need to ask them to manually save the mobile phone model and send the settings for that particular mobile phone.
The Vodafone GPRS and Internet plans with Blackberry mobiles are exclusively done with the mobile company, so they send the correct settings once you opt with any plan, which is not like the normal GPRS plans that you use with the Nokia, Sony ericsson and Samsung devices. Below are the different settings for Nokia, Samsung and Sony ericsson phones.

Vodafone Live! GPRS Settings – Samsung Phones
For Models – C130, X160, X200, X210, C210, C200, C230, X480
To setup the GPRS Settings in the above Samsung phones, go to -
Menu > Funbox > WAP Browser
Then go to settings > Choose the profile.
In the profile, you would get the different fields to be filled:
Profile name: Vodafone live!
Homepage URL:http://live.vodafone.in
Security: Non-secure
Bearer: GPRS
IP address: 10.10.1.100
Username: ______
Password:______
APN: portalnmms

For Models – X670, X700, D500, D600, D820
To setup GPRS Settings for the above Samsung phones:
Go to Menu > Browser > Proxy settings > Choose your profile

Here you get a list of fields:
Profile name:
Homepage URL:
Bearer: GPRS
Proxy use: Enabled
GPRS setting:
IP address:
IP Port:9401
APN:
Login ID:
Password:

The Homepage URL can be kept blank, or use http://live.vodafone.in
For Models – E880, X820, X630 , E530
To Setup GPRS Settings for above Samsung phones:
Go to Menu > Settings > Connection Settings > New
Complete the following fields wherever necessary:
Profile name:
Homepage URL:
Proxy:
GPRS setting:
IP address:
Port:9401
Bearer:
Advance setting:
APN:
Login ID:
Password:

Vodafone live! manual settings for Nokia phones
You need to activate Vodafone Live! first, which is free of cost and then enter the following settings in your Nokia phone -
Profile name: Vodafone live
Homepage URL: http://live.vodafone.in
Security: Non-secure
There is no charge for activating Vodafone live!
Bearer: GPRS
IP address: 10.10.1.100
Username: ______
Password: ______
APN: portalnmms

Vodafone live! manual settings for Sony Ericsson
The setting up of Vodafone Live! GPRS in Sony ericsson mobiles is a little longer one, but it works -
Go to Menu > Connectivity > Data Communication > Data Accounts > Then select New Account and the account type as GPRS Data.
New account name: Vodafone Live
Then fill the following details -
APN: portalnmms
Login ID: (Leave it Blank)
Password: (Leave it Blank)
Save the above settings, and then go back to Connectivity > Internet Settings > Internet Profiles > New Profile and name it as Vodafone Live. Now under this account, select More and go to Settings. Here you get the following fields:
Connect using: Vodafone live
Internet Mode: http
Use proxy: Yes
IP address: 10.10.1.100
Port No.: 9401
Username: _____
Password :_____

Save the above settings, and go to Advance Settings from the More option. Select “Change Homepage”, and enter:
Name: Vodafone live
Address: http://live.vodafone.in
Now save the settings, and go back to Internet profiles and select Vodafone Live.

Activate Vodafone Live!
To activate Vodafone Live for your phone, you need to send the following SMS, depending on the type of account -
Postpaid customers: sms ACT VL to 111 (toll free).
Mumbai customers need to sms ACT VLZERO to 111 (toll free)
Prepaid customers: sms ACT VL to 144 (toll free).

Get GPRS Settings from Vodafone by SMS
Once you activate Vodafone Live! you get the settings automatically as you are a first time subscriber, but in case you don’t receive any settings, just send an SMS as VL to 52586, so that the settings are delivered to your mobile through SMS. This would happen only if your handset is already recognized in the Vodafone system. If it doesn’t then you need to call the customer care and confirm the device.

Nokia 6700s Slide Not Charging problem charger no response solution

Hers the solution for Nokia 6700s slide Not charging problem issues like charger no response or no charging indication when the battery charger is plug-in. This solution shows the location of the chip fuse,a diode a resistor that need to check or replace when charger no response occurred.

Nokia 6700s slider Charger no response solution

There is a 0 ohms Resistor located beside the vibra motor. that also needs to check also when the fuse and the diode is okay.

Nokia E5 keypad Failure Solution Wet damaged solution

Heres The solution for Nokia E5 keypad malfunction. This is very useful in troubleshooting certain keys that wont work or not responding due to wet damaged. This solution completely shows each corresponding keys line paths and connection including the keypad filter IC.

Nokia E5 keypad failure solution - keypad filter IC jumper ways

There are two EMI filter chip is being used in the circuit and it is located near the battery terminal. This keypad filter cant be found from old Nokia models.

Samsung Galaxy Note 3 SM N900 Simple Tutorial How To Root N900UBUDNB2 Android 4 4 2 KitKat Firmware

Root Galaxy Note 3 SM-N900 Running N900UBUDNB2 4.4.2 KitKat through Odin:

1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish

Nokia Asha 303 Display LCD Light Solution By Jumper

In nokia Asha 303 lcd light problem display led light problem, display light not working can be solve in a few easy steps that are posted in this post. So read it carefully and see diagram bellow to solve light problem in nokia Asha 303 lcd display:

Check lcd jack and lcd jack on board clean them with electronics cleaner and leave it to dry under electrical bulb or apply some hot air so that it can be dry. Check these two links shown in diagram with different colors and if any of them is broken then please make jumpers to solve light problem in nokia Asha 303.

Nokia 7230 No Network Signal Problem Solution

Heres a brief solution for Nokia 7230 No network signal problem. This solution shows the RF circuit on nokia 7230 that holds the radio signal  during data transmission.
Please note before you may use this solution, first ensure that the device firmware is totally calibrated, successfully flashed or restored and upgraded or downgraded. This solution below covers only for hardware failure that may not or cant be fix by software or firmware. The Nokia 7230 RF circuit components mounting is similar to Nokia X6. This solution below is from Nokia X6 board. 

Nokia 7230 No Network Signal Solution

Just follow the instructions indicated on the solution above of which and where to start in  troubleshooting proceedings. In most common cases the RF Power Amplifier breakdown may most often causes the problem.

Nokia 1280 not Charging Solution Ways

Nokia 1280 not Charging Solution Ways

How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

 Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone. 

NOKIA 1110 1110I 1112 AUDIO LINE

NOKIA 1110,1110I,1112,AUDIO LINE: THE IMAGE CONTAINS NOKIA 1110 AUDIO LINE WAYS.

Nokia 2220s fake charging and not charging tested solution

Nokia 2220s fake charging and not charging tested solution

N95 8GB no lights lcd and keypad solution

N95 8GB no lights lcd and keypad solution

Nokia C7 power On Off Track Ways Jumper Solution

Nokia C7 power On Off Track Ways Jumper Solution

Nokia 5130 USB to PC connection Not detected Solution

This solution may help to fix if the Nokia 5130 unable to be detected by the PC when being connected via USB. If the driver is properly installed and the USB cable wire is okay but something went wrong and the PC wont detect the device.

The solution below show which particular components that needs to be check and or replace if found damaged. The USB connector pin and the corresponding components is being highlighted for easy checked up procedures.

Nokia 5130 USB to PC Not Detected Solution

There is a USB transceiver IC mounted near to the USB Pin connector, you  may replace this IC if found damaged.

Nokia 5030 White screen and Blue Blank LCD Display solution

Heres a solution to solved Nokia 5030 xpressradio Display problems such as White Screen, Blue scree, blank Lcd, black Lcd and any related display failures.
This solution shows the display line tracks connection from a certain components to the LCD pin connector.

5030 LCD display problem solution (display jumper ways)

The display data signals is feed from the application processor then each line is filtered by resistor before it gets through to the LCD module.

Nokia C5 Charger Not Supported Error Problem Solution

This solution may help fix if the Nokia C5 shows "charger not supported error when the battery charger is plug-in. If the error message shows, this probably cause by a faulty hardware components on Nokia C5 PCB board.

Just refer to the solution below and locate the highlighted components for it is part of  the charging indication components.

Nokia C5 Charger Not supported problem solution

Hints for repair a Nokia C5 charger not supported problem:
1. Try to use another phones battery and charger.
2. Check/clean the battery terminals and connector
3. Check/ replace the 47K resistor as shown on the solution above

nokia c1 01 c2 1616 1280 light 10000 working jumpers

nokia c1 01 c2 1616 1280 light 10000 working jumpers

1208 1209 lcd ok but blue display 100% work

1208 1209 lcd ok but blue display 100 tetsed

Nokia C2 06 Lcd Display Problem Solution Ways Jumpers

Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
 


Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

NOKIA N8 MMC PROBLEM

NOKIA N8 MMC PROBLEM: NOKIA N8 MMC PROBLEM REPAIRING SOLUTION IMAGE CONTAINS MEMORY CARD PROBLEM REPAIRING INSTRUCTION.

Nokia C1 01 LCD Screen Display Problem Jumper Ways Solution

This is the Nokia C1-01 Solution for an abnormal display problem, such as blank or empty Lcd, garbled or dark Lcd  display. This solution may works if you already tried installing a new LCD Lcd module and tried updating the device firmware but still the Lcd went wrong.

Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesnt turns ON and shows a dark display.

Blackberry 8310 charging solution

Blackberry 8310 charging solution

Nokia 111 LCD Display Problem Ways Jumpers

Nokia 111 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 111 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.


remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

Nokia 2710 Navigation Bluetooth Problem Solution

Heres the solution that might help to fix Nokia 2710 Navigation Edition bluetooth problem.
If the nokia 2710 failed and cant establish bluetooth connection to the other device this sometimes caused by a flash firmware problem. Updating or restoring the device flash firmware will might possibly fix the problem.

In some cases bluetooth failure is caused by a faulty hardware components, and this can be shown by this solution below.

Nokia 2710 Navigation Bluetooth Connection Failure Solution

This Solution may also works for Nokia 2710 FM radio and GPS problem.

In Nokia 2710 the bluetooth chip is mounted located near the interface connector and it is being covered by a shielding metal. You may first check the chips supply voltages indicated on the solution above.
the the highlighted capacitors is were the RF clock signal that feeds to the bluetooth chip. For advance troubleshooter they start to check the frequency data on that spots before trying to rework or replace the bluetooth module chip.

If the supply voltages  and the RF clock capacitors were  both okay, you may then proceed to rework and replace the bluetooth module chip. A faulty bluetooth chip will also result to FM radio and GPS failure.

Nokia 2710 Navigation Edition No Network Signal Solution

Heres the solution for Nokia 2710ne that have No network signal problem. This problem happens when the device suffered wet damaged or accidentally dropped.
For a water damaged Nokia 2710, you must ensure to clean the PCB board first before proceeding any software and hardware repair. And for accidentally dropped units like it shows a dropping signal indicator on the display, you may restore and or update the flash firmware first before you attempting hardware repair.

If the phone does not being fix through firmware restoration, you may then proceed to do a hardware check up and troubleshooting.
The solution below shows which particular components that may need to check, trace and or then replace if found damaged.

Nokia 2710 No Network Signal Problem

Hints for repair:
Before you may proceed you must see to it that the antenna terminal contact expander were not damaged nor  misaligned and it  has a proper connection to the antenna module. A poor antenna connection also results to poor, dropping, and or no network signal receptions.
If the antenna connection is okay, you may then proceed to work on the RF Power Amplifier.
Check the RF PA chips supply voltage, this voltage is feed from the phones battery 3.7 volts.
If there is no voltage reading, trace its line paths through to the battery connector positive terminal. Just manage to apply jumper wire on it if the line is cut, fot it is the only option.

If the supply voltage is okay you may then remove the RF amplifier chip. Check all the solder bumps if there is already lifted or damaged. Install a new RF power amplifier. In most cases a damage RF Power Amplifier result to No Network Signal like on nokia 2710 navigation edition.

nokia x7 insert sim solution

nokia x7 insert sim solution

Nokia x2 hand free open problem jumpers solution

Nokia X2-00 handfree problem, hand free singe, hand free open, can be solve with this diagram that I am going to post in this post bellow. look at the diagram and these two ic and there near about area if you find some rust water damage or carbon here you can clean the board and dry it.

Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in nokia X2-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution. some related post are also given bellow you can read them also for more information about cell phone.

Nokia X Pattern Lock, Phone Lock Unlocking Solution

Nokia X Pattern Lock, Phone Lock Unlocking Solution NOKIA NEW X 100% DONE UNLOCK WIPE DATA nokia x pattern lock and phone lock unlock solution, PRESS VOL UP +POW.U SEE THE DETAILS wipe up and your phone is unlocked.

Lg ku990 mic solution

Lg ku990 mic solution

NOkia X1 01 Battery Connector Ways

NOkia X1-01 Battery Connector Solution Ways

nokia x1 01 battery connector jumper

nokia x1 01 battery connector solution

nokia x1-01 battery connector ways

nokia x1-01 battery connector jumper solution

nokia x1 01 battery connector review

1616 1800 1280 Light 100 000 new solution

1616 1800 1280 Light 100 000 new solution

NOKIA 1110 DISPLAY WAYES

NOKIA 1110 DISPLAY WAYES: TO KNOW ABOUT NOKIA 1110 DISPLAY WAYES, FOLLOW THE IMAGE.