How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

 Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone.