Showing posts with label c1. Show all posts
Showing posts with label c1. Show all posts
Saturday, November 15, 2014
nokia c1 01 c2 1616 1280 light 10000 working jumpers
nokia c1 01 c2 1616 1280 light 10000 working jumpers
Thursday, November 13, 2014
Nokia C1 01 LCD Screen Display Problem Jumper Ways Solution
Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesnt turns ON and shows a dark display.
Saturday, November 8, 2014
Friday, November 7, 2014
Nokia C1 00 Insert SIM card Problem Solution
Nokia C1 00 Insert SIM card Problem Solution
Friday, September 19, 2014
Nokia C1 01 Rm 607 Latest Version 06 07 Flash Files Free Download
Nokia C1-01 Rm 607 Latest Flash Files Mcu Ppm Cnt Free Download
![Nokia]()
DOWNLOAD LINKS
Nokia C1-01 Rm 607 Latest Flash Files Mcu Ppm Cnt Free DownloadFriday, August 29, 2014
Nokia C1 Solution C1 01 Earpiece Speaker No Audio Sound
Heres the solution for Nokia C1-01 Earpiece Speaker problem that has no audio Sound can b heard on it during a call is made. If this problem there is a possibility the earpiece speaker is already busted or damaged due to audio signal overdrive. Some factors are of dirty or oxidation build up on the earpiece terminal contact pads.
This solution below shows which particular components needs to be check for hardware repair troubleshooting.
This solution below shows which particular components needs to be check for hardware repair troubleshooting.
Nokia C1-01 Earpiece Speaker Solution
Hints for repair:
Check the earpiece speaker first by using a multimeter set to X1, you can hear a crackling sound when hitting the two terminal with the testers probes.
Clean the earpiece terminal contact pads on the C1-01 PCB board.
If the earpiece speaker is working and the contact pads is already cleaned but still the problem still exist. You may used the solution above and check those highlighted components, it is composed of filter coils, an ESD protection resistors and bypass capacitors.
Check the earpiece speaker first by using a multimeter set to X1, you can hear a crackling sound when hitting the two terminal with the testers probes.
Clean the earpiece terminal contact pads on the C1-01 PCB board.
If the earpiece speaker is working and the contact pads is already cleaned but still the problem still exist. You may used the solution above and check those highlighted components, it is composed of filter coils, an ESD protection resistors and bypass capacitors.
Monday, August 25, 2014
Saturday, August 23, 2014
Subscribe to:
Posts (Atom)