Root Galaxy Note 3 SM-N900 Running N900UBUDNB2 4.4.2 KitKat through Odin:

1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish

Ok, the Google Nexus 5 has been out there for a while and we think its about time for a root tutorial. So, without further ado, here is our step by step guide with images.



















As always, gaining root access is risky, and if you do not follow the procedure properly, you can end up with an unusable phone. Also, please note that all data is deleted during the operation so back up all your data first. Neither AndroidPIT or myself will be held responsible for anything unflattering that may happen to your Nexus 5.

The following procedure is valid only for the Google Nexus 5.

Prerequisites

 

Install the Nexus 5 drivers on your PC (just plug it in and wait a few minutes, it will install them automatically).

Ensure that you have Administrator rights on Windows (if you do not know what these are, you probably havent got them).

Make sure your Nexus 5 has at least 60% of battery. 70% is better, and fully charged is... you get the drift.

Downloads

 

Android SDK:
Windows 32- & 64-bit
Mac OS X 32- & 64-bit
Linux 32- & 64-bit 
The general procedure is the same as on Windows, but the commands to use in the terminal are different on Mac and Linux. This tutorial is for a PC running Windows.
Custom Recovery:
ClockworkMod (CWM)
Root:
SuperSU v1.65

I. Installing ADB and Fastboot

 

1. Download the Android SDK for your computers operating system and unzip it in a folder named "Android SDK.

2. Launch "SDK-Manager.exe" and install the following packages:

• Tools > Android SDK Tools, Android SDK Platform-Tools
• Extras > Android Support Library, Google USB Driver

3. Look for the new "Platform-Tools" folder in the "Android SDK" directory.

 

 II. Unlocking the bootloader

 

1. Turn off your Nexus 5.

2. Reboot into fastboot mode by pressing and holding the Volume Down + Power button.

3. Connect your Nexus 5 to your computer with a USB cable.

4. Open the Android SDK > SDK > Platform-Tools directory then right-click in an empty area while holding the shift key.

5. Click "Open the command prompt here".

6. Enter the following command:

fastboot devices

If you get a serial number, its good and you can continue. Otherwise, your drivers are not installed correctly.

7 . Enter the following command:

fastboot oem unlock

8 . On your Nexus 5, confirm with "Yes" using the Volume keys to move and the Power button to confirm.

9 . Enter the following command:

fastboot reboot

III. Installing the custom recovery

 

1. Turn off your Nexus 5

2. Reboot into fastboot mode (as in Section II)

3. Copy the custom recovery file downloaded earlier into the Android SDK > SDK > Platform-Tools directory. Rename the file "recovery.img". If it does not work, simply rename the file "recovery" without the "img".

4. In the command prompt window (as per Section II), enter the following command:

fastboot flash recovery recovery.img

5. On your Nexus 5, use the unusable Volume buttons to select the "Restart bootloader" option and press the Power button.

6. You can now verify the custom recovery installation by entering "Recovery Mode". If you arrive on the CWM screen, the recovery is all good.

IV. Root

 

1 . Reboot your Nexus 5 normally. Copy the previously downloaded file "SuperSU v1.65" to the root of your smartphone.

2 . Reboot into fastboot mode (as in Section II) and choose Recovery Mode.

3 . Choose the "install zip from sdcard" option.

4 . Select "choose zip from sdcard".


 5 . Locate the "SuperSU v1.65" file and select it.

6 . Confirm with "Yes".

7 . Once the file installation is complete, restart by selecting "go back" then "reboot now".

8 . Final check: install an application to verify root such as Root Checker. If everything is green, its all good! Congratulations, your Google Nexus 5 is rooted!

How To Root Nexsus 10 KOT49E

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 10 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 10 runs on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer from the Nexus 10 and looking for an application called SuperSU. Verify the status of the root device by downloading the Root Checker app from Google Play Store.

And terimaksih have followed the above alloy ..

Have you bought the new LG Android based tablet? Yes I’m talking about the G Pad 8.3, a great handsets that combines high end specs and features with an impressive design and affordable price tag. Anyway, if you have bought this device, then probably you are looking into a suitable root method. Why to root a handset that is already offering high end performances? Well, we will talk about this and about other relevant aspects below, so before heading to the proper root solution, check the following lines.
So, why to gain root access on the LG G Pad 83? The reasons are many, but we will detail only the most relevant ones. First, you need to gain root access because probably you will want to install a custom ROM firmware. The LG G Pad 8.3 is not a Nexus handset which means that the tablet is running Android Jelly Bean OS and not Android 4.4 KitKat firmware. Also, the OTA KitKat update is expected only next year, on February or March, so you will probably want to test the latest features, apps and capabilities ahead of official release of Android 4.4 and for doing that you will need to flash a custom ROM, thus gaining root access.
Furthermore, if you want to apply a custom firmware, first you will have to flash a custom recovery image, like CWM or TWRP recovery. As you can already tell, in that case root access must be granted on your G Pad 8.3. We can go on with these examples as root is required also when trying to remove the bloatware, to install a custom kernel, to overclock the CPU, to install custom apps from Google Play, to remove or add features or inbuilt programs and so on. Basically, on a rooted device you can improve the performances, upgrade the battery life, bump the speeds, change the classic Android UI and lot more.
But, on the other hand, you should know that there are negative aspects too. For example, when gaining root access you are applying an unofficial operation that has nothing to do with Google or with LG. That’s why, if you complete this tutorial, the LG G Pad 8.3 warranty will get void. Also, if you root your tablet, when Android 4.4 OTA update will be rolled out you will not be able to receive the firmware – on a rooted handset the OTA updates can be only manually installed. As for the warranty, if you will need it back you will have to flash the stock Android software on your G Pad 8.3 by following a suitable step by step guide – then the root access will be revoked and the tablet restored to its initial state.
Good; so if you want to complete this tutorial the up mentioned info should be cleared on your mind. Now, the tool from below (the root package to be more precise) is being provided by those of xda-developers so we have to thanks them for this step by step guide. Now, before heading to the root procedure, you first have to prepare your tablet from what will shortly follow.
Start by making a backup. It is important to save your personal info and accounts as in some cases, when gaining root access the system is being wiped out, or the data corrupted. I recommend you to save the contacts, the internet settings, your personal accounts, data and info and market apps. Also, save anything else that’s saved on the internal storage memory of your LG G Pad 8.3 by using suitable backup and restore apps from Google Play – don’t worry as these tools are free distributed (you don’t have to spend your money on the download procedure).
A computer, your handset and its USB cable are being required for this process. For being able to connect the devices you will first have to enable the USB debugging option from your tablet – just go to “menu – settings – developer options”. Also, on your computer the G Pad drivers must be installed. If not, you can install the drivers manually by downloading the required files from here. Your computer shouldn’t be installed with antivirus tools. If there are antivirus or any other security programs installed, the best will be to deactivate the security protection before starting the root process – these tools might interfere with our work.
It is important to know that if your G Pad gets turned off in middle of root, your tablet might get bricked out. So, first of all check the battery status and if there is less than 50% power left, plug in the charger. Also, check the model number of your G Pad. This root solution works only for the LG G Pad 8.3 V500; don’t use the steps from below in case you own a different Android based device because this tutorial is compatible only with the mentioned tablet.
Perfect; you are now prepared for the proper root operation. Do remember that this procedure is complex, risky and unofficial. Because of that, for avoiding the unpleasant situations, stick to the steps from below. Don’t complete things by yourselves without consulting the guidelines from this tutorial because you can end up in bricking your LG GPad.

How to Easily Root LG G Pad 8.3

1. On your computer download the root file from here (the same package can be downloaded from here, or from here).
2. On your computer, preferable on desktop, unzip the downloaded root file.
3. On your G Pad enable the developer option; do that by going to settings – about phone and tap on built number (seven times).
4. Connect your tablet with the computer.
5. Use and plug in the USB cable in order to establish the connection.
6. Go to the root folder from desktop.
7. From there run the root.bat executable file.
8. It will push g_security to your SD-Card.
9. The process will be stopped.
10. At this point you need to unplug the USB cable; disable and re-enable the USB debugging option on your tablet as showed above.
11. Connect your handset with the computer once more.
12. Press any key to continue the root operation.
13. Now an alert message will be displayed. At this pint if you continue the warranty will get void.
14. Press ctr+c if you want to abort.
15. If not, follow the on-screen prompts.
16. Your tablet will be rooted.
17. In the end the Superuser.apk will be displayed in your app drawer.
18. Done.

That was all for now. Gaining root access on your LG G Pad 8.3 wasn’t hard, as the steps you had to complete were easy to follow. Anyway, if you have experienced issues or problems while applying the procedure from above, try to use this tutorial: “how to resolve most common Android issues”.
Now, as your tablet is finally rooted, you can test the new Android 4.4 KitKat firmware without waiting for the OTA to be rolled out. You can anytime install a custom ROM software on your G Pad and you can do even more as now your handsets is your new playground.