Pages

Showing posts with label Manual. Show all posts
Showing posts with label Manual. Show all posts

Tuesday, November 18, 2014

Vodafone India General GPRS MMS WAP Manual Settings


Andhra Pradesh & Karnataka Vodafone GPRS Settings
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:

Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
Tamil Nadu State Vodafone GPRS Settings

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9201
Data Bearer: Packet Data

Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)

Vodafone GPRS Settings for China Mobiles
To enter settings in the Chinese mobiles used in India, here is how you need to do it -
Go to Menu > Services > WAP > Settings
In the settings, select a profile and select “Edit Profile”

Here you need to make the following changes -
Profile name rename: Vodafone_gprs
Homepage: http://live.vodafone.in/
Data Account: Vodafone_gprs
Connection type: In all the 3 options, the IP address should be 010.010.001.100
Usually the proxy port to be used is 9401, but you need to confirm the proxy port from your mobile network and this depends on your location.

Below WAP, there is a Data Account where you need to make a few changes:
GPRS Settings edit:
1. Account Name: Vodafone_gprs
2. APN: portalnmms
3. Username: (Leave it Blank)
4. Password: (Leave it Blank)
5. Auth. Type: Normal

More info :
As we have shared the info only about Andhra Pradesh, Karnataka and Tamil Nadu you can enter the same details for any state, but the only problem would be the proxy port which is different for every state usually. You can confirm this and get the Proxy port information by calling the customer care (111 for Vodafone).
For any settings you change, you need to restart the phone and then try browsing the internet as the settings saved get activated after the phone is restarted once.
If the device is not recognized by your carrier and the settings don’t work, you should once remove the SIM card from the device, reinsert it and then call the customer care to confirm whether the device is recognized. If not, you need to ask them to manually save the mobile phone model and send the settings for that particular mobile phone.
The Vodafone GPRS and Internet plans with Blackberry mobiles are exclusively done with the mobile company, so they send the correct settings once you opt with any plan, which is not like the normal GPRS plans that you use with the Nokia, Sony ericsson and Samsung devices. Below are the different settings for Nokia, Samsung and Sony ericsson phones.

Vodafone Live! GPRS Settings – Samsung Phones
For Models – C130, X160, X200, X210, C210, C200, C230, X480
To setup the GPRS Settings in the above Samsung phones, go to -
Menu > Funbox > WAP Browser
Then go to settings > Choose the profile.
In the profile, you would get the different fields to be filled:
Profile name: Vodafone live!
Homepage URL:http://live.vodafone.in
Security: Non-secure
Bearer: GPRS
IP address: 10.10.1.100
Username: ______
Password:______
APN: portalnmms

For Models – X670, X700, D500, D600, D820
To setup GPRS Settings for the above Samsung phones:
Go to Menu > Browser > Proxy settings > Choose your profile

Here you get a list of fields:
Profile name:
Homepage URL:
Bearer: GPRS
Proxy use: Enabled
GPRS setting:
IP address:
IP Port:9401
APN:
Login ID:
Password:

The Homepage URL can be kept blank, or use http://live.vodafone.in
For Models – E880, X820, X630 , E530
To Setup GPRS Settings for above Samsung phones:
Go to Menu > Settings > Connection Settings > New
Complete the following fields wherever necessary:
Profile name:
Homepage URL:
Proxy:
GPRS setting:
IP address:
Port:9401
Bearer:
Advance setting:
APN:
Login ID:
Password:

Vodafone live! manual settings for Nokia phones
You need to activate Vodafone Live! first, which is free of cost and then enter the following settings in your Nokia phone -
Profile name: Vodafone live
Homepage URL: http://live.vodafone.in
Security: Non-secure
There is no charge for activating Vodafone live!
Bearer: GPRS
IP address: 10.10.1.100
Username: ______
Password: ______
APN: portalnmms

Vodafone live! manual settings for Sony Ericsson
The setting up of Vodafone Live! GPRS in Sony ericsson mobiles is a little longer one, but it works -
Go to Menu > Connectivity > Data Communication > Data Accounts > Then select New Account and the account type as GPRS Data.
New account name: Vodafone Live
Then fill the following details -
APN: portalnmms
Login ID: (Leave it Blank)
Password: (Leave it Blank)
Save the above settings, and then go back to Connectivity > Internet Settings > Internet Profiles > New Profile and name it as Vodafone Live. Now under this account, select More and go to Settings. Here you get the following fields:
Connect using: Vodafone live
Internet Mode: http
Use proxy: Yes
IP address: 10.10.1.100
Port No.: 9401
Username: _____
Password :_____

Save the above settings, and go to Advance Settings from the More option. Select “Change Homepage”, and enter:
Name: Vodafone live
Address: http://live.vodafone.in
Now save the settings, and go back to Internet profiles and select Vodafone Live.

Activate Vodafone Live!
To activate Vodafone Live for your phone, you need to send the following SMS, depending on the type of account -
Postpaid customers: sms ACT VL to 111 (toll free).
Mumbai customers need to sms ACT VLZERO to 111 (toll free)
Prepaid customers: sms ACT VL to 144 (toll free).

Get GPRS Settings from Vodafone by SMS
Once you activate Vodafone Live! you get the settings automatically as you are a first time subscriber, but in case you don’t receive any settings, just send an SMS as VL to 52586, so that the settings are delivered to your mobile through SMS. This would happen only if your handset is already recognized in the Vodafone system. If it doesn’t then you need to call the customer care and confirm the device.
ReadHere..

Wednesday, September 24, 2014

UnRoot Manual Update Galaxy S3 I9305 with Official Jellybean 4 1 2 XXBME3 Firmware

 Samsung Galaxy S3 I9305 smartphone can now be un rooted. Once the device is unrooted, the warranty can be reclaimed. Let’s check out on how you can un root the device by applying the official firmware which is released by Samsung. Before we proceed on to check on what are the instructions to apply this firmware update, you need to follow the list of quick pre requisites which we have summed up below. To unroot the device, the simplest process to do is to apply the official firmware update which was rolled out by Samsung Electronics. This firmware which we will be talking about is the official firmware and is dubbed as XXBME3 Jellybean 4.1.2 Firmware.



Quick Pre Requisites:
  • Create a backup of all your data with the help of below mentioned steps. Though, you can back up the data with KIES as well, we recommend you to backup manually with the help of below mentioned steps as sometimes KIES refuses to detect the device.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names
  • From the path “Settings > Development Options > USB debugging” enable the USB Debugging Mode. Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.
Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.
Assuming that you are done with all the above mentioned steps, you can now proceed below,  where we have mentioned the detailed guide on how to apply with this firmware update. 


Procedure to Update Galaxy S3 I9305 LTE Smartphone with Jellybean 4.1.2 Firmware:
  • Open Odin in your computer. Download Mode in Galaxy S3 I9305 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.
  • Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.
  • Click on “PDA” to select the tar file which you got from the firmware package which is the TAR File which you got after extracting the file from the first step.
  • Once all the file is selected, click on “Start” to start the process of firmware update. Once the firmware update process is completed which will be mentioned in the ODIN, the Galaxy S2 device will be rebooted.
  • For firmware update to be finished, it will take around 2-3 minutes for applying the update. Once the device is updated successfully, the device will be rebooted. As soon as you see the Language preferences or the Home Screen, you need to disconnect the device from computer and enjoy using your phone.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go, you have now successfully updated your phone with the latest firmware of Jellybean 4.1.2 in your Galaxy S3 LTE I9305 smartphone. Do let us know in the comments section just in case if you face any issues.
ReadHere..