Pages

Showing posts with label solution. Show all posts
Showing posts with label solution. Show all posts

Tuesday, January 6, 2015

Nokia 1110 1600 Ear Speaker Solution


Nokia 1110 1600 Ear Speaker Solution
ReadHere..

Sunday, December 7, 2014

Nokia 1680c 0 Keys Not Working Solution

Nokia 1680c *,0,# Keys Not Working Solution
ReadHere..

Thursday, November 20, 2014

Sony Ericsson K700 Hang Solution

Sony Ericsson K700 Hang Problem Solution

ReadHere..

Nokia C3 00 Earpiece Solution Ways

Nokia C3-00 Speaker Not Working
ReadHere..

Wednesday, November 19, 2014

iPhone 3G Wi Fi Not Working Problem Repair Solution

iPhone 3G Wi-Fi Not Working Problem Repair Solution
iPhone 3G Wi-Fi Not Working Problem Repairing
iPhone 3G Wi-Fi Not Working Problem
ReadHere..

Tuesday, November 18, 2014

Nokia C2 00 Charging No Response Solution


Nokia C2 00 Charging No Response Solution

ReadHere..

Nokia 6700s Slide Not Charging problem charger no response solution

Hers the solution for Nokia 6700s slide Not charging problem issues like charger no response or no charging indication when the battery charger is plug-in. This solution shows the location of the chip fuse,a diode a resistor that need to check or replace when charger no response occurred.
Nokia 6700s slider Charger no response solution
nokia
There is a 0 ohms Resistor located beside the vibra motor. that also needs to check also when the fuse and the diode is okay.
ReadHere..

Monday, November 17, 2014

Nokia E5 keypad Failure Solution Wet damaged solution

Heres The solution for Nokia E5 keypad malfunction. This is very useful in troubleshooting certain keys that wont work or not responding due to wet damaged. This solution completely shows each corresponding keys line paths and connection including the keypad filter IC.
Nokia E5 keypad failure solution - keypad filter IC jumper ways
nokia
There are two EMI filter chip is being used in the circuit and it is located near the battery terminal. This keypad filter cant be found from old Nokia models.
ReadHere..

Nokia Asha 303 Display LCD Light Solution By Jumper

In nokia Asha 303 lcd light problem display led light problem, display light not working can be solve in a few easy steps that are posted in this post. So read it carefully and see diagram bellow to solve light problem in nokia Asha 303 lcd display:


Check lcd jack and lcd jack on board clean them with electronics cleaner and leave it to dry under electrical bulb or apply some hot air so that it can be dry. Check these two links shown in diagram with different colors and if any of them is broken then please make jumpers to solve light problem in nokia Asha 303.
ReadHere..

Nokia 7230 No Network Signal Problem Solution

Heres a brief solution for Nokia 7230 No network signal problem. This solution shows the RF circuit on nokia 7230 that holds the radio signal  during data transmission.
Please note before you may use this solution, first ensure that the device firmware is totally calibrated, successfully flashed or restored and upgraded or downgraded. This solution below covers only for hardware failure that may not or cant be fix by software or firmware. The Nokia 7230 RF circuit components mounting is similar to Nokia X6. This solution below is from Nokia X6 board. 
Nokia 7230 No Network Signal Solution
nokia

Just follow the instructions indicated on the solution above of which and where to start in  troubleshooting proceedings. In most common cases the RF Power Amplifier breakdown may most often causes the problem.
ReadHere..

Nokia 1280 not Charging Solution Ways


Nokia 1280 not Charging Solution Ways
ReadHere..

Sunday, November 16, 2014

Nokia 2220s fake charging and not charging tested solution

Nokia 2220s fake charging and not charging tested solution
ReadHere..

N95 8GB no lights lcd and keypad solution


N95 8GB no lights lcd and keypad solution
ReadHere..

Saturday, November 15, 2014

Nokia C7 power On Off Track Ways Jumper Solution


Nokia C7 power On Off Track Ways Jumper Solution

ReadHere..

Nokia 5130 USB to PC connection Not detected Solution

This solution may help to fix if the Nokia 5130 unable to be detected by the PC when being connected via USB. If the driver is properly installed and the USB cable wire is okay but something went wrong and the PC wont detect the device.

The solution below show which particular components that needs to be check and or replace if found damaged. The USB connector pin and the corresponding components is being highlighted for easy checked up procedures.
Nokia 5130 USB to PC Not Detected Solution
nokia
There is a USB transceiver IC mounted near to the USB Pin connector, you  may replace this IC if found damaged.
ReadHere..

Nokia 5030 White screen and Blue Blank LCD Display solution

Heres a solution to solved Nokia 5030 xpressradio Display problems such as White Screen, Blue scree, blank Lcd, black Lcd and any related display failures.
This solution shows the display line tracks connection from a certain components to the LCD pin connector.
5030 LCD display problem solution (display jumper ways)
The display data signals is feed from the application processor then each line is filtered by resistor before it gets through to the LCD module.
ReadHere..

Nokia C5 Charger Not Supported Error Problem Solution

This solution may help fix if the Nokia C5 shows "charger not supported error when the battery charger is plug-in. If the error message shows, this probably cause by a faulty hardware components on Nokia C5 PCB board.

Just refer to the solution below and locate the highlighted components for it is part of  the charging indication components.
Nokia C5 Charger Not supported problem solution

Nokia
Hints for repair a Nokia C5 charger not supported problem:
1. Try to use another phones battery and charger.
2. Check/clean the battery terminals and connector
3. Check/ replace the 47K resistor as shown on the solution above
ReadHere..

Friday, November 14, 2014

Nokia C2 06 Lcd Display Problem Solution Ways Jumpers

Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
 


Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
ReadHere..

Thursday, November 13, 2014

Nokia C1 01 LCD Screen Display Problem Jumper Ways Solution

 nokia c1-01 lcd screen display problem jumper ways & tracks
This is the Nokia C1-01 Solution for an abnormal display problem, such as blank or empty Lcd, garbled or dark Lcd  display. This solution may works if you already tried installing a new LCD Lcd module and tried updating the device firmware but still the Lcd went wrong.

Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesnt turns ON and shows a dark display.
ReadHere..

Blackberry 8310 charging solution


Blackberry 8310 charging solution

ReadHere..