Pages

Showing posts with label to. Show all posts
Showing posts with label to. Show all posts

Thursday, December 11, 2014

Way to Jailbreak iPhone 4 On iOS 5 1 With Redsnow Mac OS X


This tutorial will help you to jailbreak your iPhone 4 using Redsnow . First of all i tell you that it is tethered jailbreak so you have to connect your iPhone with Mac computer and re-run redsnow to boot your iPhone 4 into fully operational state every time your iphone loses power. I am also telling you that this jaolbreak will not work on iPhone 4S and that iBooks will not work correctly until iPhone Dev-Team implement a patch that will fix this.
To jailbreak follow these steps .

Step 1: To get started you will need to( download RedSn0w 0.9.1
0b6) on your Mac
Step 2: Once download process is completed start RedSn0w 0.9.10b6 launcher and click Jailbreak button located in middle of your window
Step 3: When the next window shows up, connect your iPhone 4 with your Mac using USB cable and power off your iPhone.


Step 4: When you are ready click Next button in existing window which will start DFU mode process


Step 5: When you click Next button simply follow instructions inside redsn0w window and continue clicking Next, after every step you perform on your iPhone (those steps you can find below)
  • Hold down the Power (corner) button for 3 seconds
  • Without releasing the Power button, also hold down the Home (bottom center) button for 10 seconds
  • Without releasing the Home button, release the Power button BUT KEEP holding the Home button for 15 seconds
Step 6: After you have successfully entered in DFU mode with your iPhone 4, redsn0w will begin preparing your iPhone 4 for the Jailbreak
Step 7: Once redsn0w is finished preparing your iPhone 4 for Jailbreak a new window will show up where you need to specify options to go along with Jailbreak. You can specify any option you want but I suggest you to choose only Install Cydia and click Next
Step 8: Once you click next the Jailbreak process will begin, DO NOT interrupt this process and wait until it’s finished. When jailbreak process is finished iPhone will boot up and stuck at Apple logo. If this happens to you it’s because this is a tethered jailbreak and you will need to boot tethered with redsn0w in order to make your iPhone work.
Step 9: To boot your iPhone using redsn0w lunch redsn0w again and click Extras button and then choose Just bootbutton
Step 10: After that you will simply need to put your iPhone into DFU mode again.
ReadHere..

Friday, November 21, 2014

How to install downloaded applications in Windows Phone 8 1 Store

With the arrival of Windows Phone 8, I get a method by which we could install applications on our phone from SD card.
Thus, we could save the download application using mobile and space involved in the memory of the phone during installation.
But only apps downloaded from the Windows Phone Store, and maintaining connection to the store because it was checking if we had permission to install it.
Yes, all holders of a terminal that does not have SD card, could not make that method.
With Windows Phone 8.1 , the possibilities have increased and it is now possible:
  • Install applications on SD card through our terminal to save space on the phone memory.
  • Move installed to SD card or SD card applications being able to free up the phone and installed applications.
But can we still install downloaded from Windows Phone Store applications? Well the answer is yes, and that point has also improved. Now not only the owners of an SD card terminal can perform the installation , but also those with only internal storage.
To do this, simply copy the downloaded file to the root of the phone or the root directory of the SD card.
Once youve copied the file, well go to the Windows Phone Store.

Click on options and see an option that had previously not now appears to install local applications. If we click on it we get a list of applications and is compatible and can install it we can select.


It is a good method if we unloaded a heavy application as it can be a game in hand even gigas and we have to install it on multiple terminals. Now available even without SD card terminals. Of course, we can only install applications we can install from the store itself .
ReadHere..

Thursday, November 20, 2014

How to receive pictures by text message on HTC Droid

The HTC Droid Incredible is integrated with the Android smartphone operating system . In addition to various functions of software and hardware, has a high capacity usage data , which enables you to access the Internet, check your email and take advantage of MMS services. An MMS message is a message with an attached media and if you get one with a picture attached , you see it or download it easily just now.How to receive pictures by text message on HTC Droid
  1. Go to the " Start" Lcd, press the button that says "Start " button below the Lcd with the image of a house.
  2. Click " Applications" in the lower left corner of the Lcd and select " Messages" .
  3. Tap the message to open MMS .
  4. You can view or download the attachment. To view simply click the attachment and wait a minute. To download on your storage card, press and hold the name or number of the sender to display the options for that message. Click " Save [ attachment type ] " and after downloading the attachments , you can see them in the "Gallery " application .

Tips and Warnings
  • If you have your Droid Incredible configured to automatically notify you when you arrive and MMS text messages , you can open the message directly instead of locating in the tray of "messages " . The notification icon appears in the status bar at the top of the Lcd. Just press the status bar and swipe down the Lcd, then tap the notification to open the message .
  • To view or download attachments you use your phone s data plan. You can always see the size of the attachment on the MMS message before really download it.
ReadHere..

Monday, November 17, 2014

Samsung Galaxy Note 3 SM N900 Simple Tutorial How To Root N900UBUDNB2 Android 4 4 2 KitKat Firmware

Root Galaxy Note 3 SM-N900 Running N900UBUDNB2 4.4.2 KitKat through Odin:
  1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
  4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
  6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your phone should automatically reboot after completion
  12. You can now disconnect your phone from computer
  13. Finish
ReadHere..

Sunday, November 16, 2014

How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

 Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:
  1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
  6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone
ReadHere..

Saturday, November 15, 2014

Nokia 5130 USB to PC connection Not detected Solution

This solution may help to fix if the Nokia 5130 unable to be detected by the PC when being connected via USB. If the driver is properly installed and the USB cable wire is okay but something went wrong and the PC wont detect the device.

The solution below show which particular components that needs to be check and or replace if found damaged. The USB connector pin and the corresponding components is being highlighted for easy checked up procedures.
Nokia 5130 USB to PC Not Detected Solution
nokia
There is a USB transceiver IC mounted near to the USB Pin connector, you  may replace this IC if found damaged.
ReadHere..

Saturday, November 8, 2014

How To Hard Reset Samsung Galaxy Win I8552

How To Hard Reset  / Remove Pattern Lock  From Your   Samsung Galaxy Win

  
Pattern Lock Remove From I8552

 

* Switch Off Your Device 
* Take Out Your Sim And Memmory Card
* Press And Hold  Volume Up Key  +  Home Key    +  Then Power On Your Phone
* Hold Pressing Keys. Release Power Button After 2-3 sec 
* Then You Will Get Factory Reset Menu
* Select Wipe Data/ Factory Reset Option . Scroll Using Volume Key . Then Confirm Using Power Key
* By Select Yes Delete All User Data. Using Volume Down Key . Confirm It
* Wait Some Seconds. Then Select Reboot System Now Option And Confirm
* Now Your Phone Will Restarted. After Completing The Hard Reset Proses
* Done !
ReadHere..

Wednesday, November 5, 2014

How to root Google Nexus 5

Ok, the Google Nexus 5 has been out there for a while and we think its about time for a root tutorial. So, without further ado, here is our step by step guide with images.



















As always, gaining root access is risky, and if you do not follow the procedure properly, you can end up with an unusable phone. Also, please note that all data is deleted during the operation so back up all your data first. Neither AndroidPIT or myself will be held responsible for anything unflattering that may happen to your Nexus 5.

The following procedure is valid only for the Google Nexus 5.

Prerequisites

 

Install the Nexus 5 drivers on your PC (just plug it in and wait a few minutes, it will install them automatically).

Ensure that you have Administrator rights on Windows (if you do not know what these are, you probably havent got them).

Make sure your Nexus 5 has at least 60% of battery. 70% is better, and fully charged is... you get the drift.

Downloads

 

Android SDK:
Windows 32- & 64-bit
Mac OS X 32- & 64-bit
Linux 32- & 64-bit 
The general procedure is the same as on Windows, but the commands to use in the terminal are different on Mac and Linux. This tutorial is for a PC running Windows.
Custom Recovery:
ClockworkMod (CWM)
Root:
SuperSU v1.65

I. Installing ADB and Fastboot

 

1. Download the Android SDK for your computers operating system and unzip it in a folder named "Android SDK.

2. Launch "SDK-Manager.exe" and install the following packages:
  • Tools > Android SDK Tools, Android SDK Platform-Tools
  • Extras > Android Support Library, Google USB Driver
3. Look for the new "Platform-Tools" folder in the "Android SDK" directory.


 

 II. Unlocking the bootloader

 

1. Turn off your Nexus 5.

2. Reboot into fastboot mode by pressing and holding the Volume Down + Power button.

3. Connect your Nexus 5 to your computer with a USB cable.

4. Open the Android SDK > SDK > Platform-Tools directory then right-click in an empty area while holding the shift key.

5. Click "Open the command prompt here".

6. Enter the following command:
fastboot devices

















If you get a serial number, its good and you can continue. Otherwise, your drivers are not installed correctly.

7 . Enter the following command:
fastboot oem unlock
8 . On your Nexus 5, confirm with "Yes" using the Volume keys to move and the Power button to confirm.

9 . Enter the following command:
fastboot reboot

III. Installing the custom recovery

 

1. Turn off your Nexus 5

2. Reboot into fastboot mode (as in Section II)

3. Copy the custom recovery file downloaded earlier into the Android SDK > SDK > Platform-Tools directory. Rename the file "recovery.img". If it does not work, simply rename the file "recovery" without the "img".

4. In the command prompt window (as per Section II), enter the following command:
fastboot flash recovery recovery.img

5. On your Nexus 5, use the unusable Volume buttons to select the "Restart bootloader" option and press the Power button.

6. You can now verify the custom recovery installation by entering "Recovery Mode". If you arrive on the CWM screen, the recovery is all good.

IV. Root

 

1 . Reboot your Nexus 5 normally. Copy the previously downloaded file "SuperSU v1.65" to the root of your smartphone.

2 . Reboot into fastboot mode (as in Section II) and choose Recovery Mode.

3 . Choose the "install zip from sdcard" option.

4 . Select "choose zip from sdcard".


 5 . Locate the "SuperSU v1.65" file and select it.

6 . Confirm with "Yes".

7 . Once the file installation is complete, restart by selecting "go back" then "reboot now".

8 . Final check: install an application to verify root such as Root Checker. If everything is green, its all good! Congratulations, your Google Nexus 5 is rooted!
ReadHere..

Sunday, November 2, 2014

How to Master Reset a Nokia 5800 or a Nokia 5800 Hard Reset

reset to factory settings
Nokia

To Nokia 5800 master reset or Nokia 5800 hard reset a Nokia 5800 :

On your Nokia 5800 Hard Reset
Press and hold GREEN + RED + CAMERA when powering up your Nokia 5800 cell phone,
Your Nokia 5800 will ask for a Master Reset code or Hard Reset code
input default 12345 security code.

Instead of a Nokia 5800 Hard Reset you can choose to perform Nokia 5800 soft reset
On your Nokia 5800 dial:
*#7370*
ReadHere..

Thursday, October 30, 2014

How To Factory Reset Motorola Dext

How To Factory Reset  Motorola Dext

  •  Holding the Camera button while turning on your phone,
  • When prompted hit the Volume-Down rocker button to go into Recovery Mode.
  • After you get into Recovery Mode,
  • Press ALT+L to reset, then Menu+Back to reboot.
ReadHere..

Wednesday, October 29, 2014

How to HTC Master Reset or HTC Hard Reset a HTC S620 or HTC S621

reset to factory settings

To perform a HTC master reset HTC hard reset on your HTC S621 / HTC S620 you will need to:

1. PRESS AND HOLD BOTH SOFT KEYS.
2. WHILE HOLDING DOWN SOFT KEYS, PRESS AND RELEASE THE POWER BUTTON, WAIT 3-5 SEC. (PHONE SHOULD POWER ITSELF ON BY DOING THIS)
3. RELEASE THE TWO KEYS SOFT KEYS.
4. WHEN SCREEN ON DASH LOOKS LIKE ITS IN DOS FORMAT, PRESS SEND (GREEN ANSWER KEY)
or
With the phone on
Select Start> Accessories> Clear Storage> enter reset code default is 12345> Select YES.

ReadHere..

Thursday, October 23, 2014

How to Root the Motorola Droid 2 Global

The Motorola Droid 2 Global is as the name would suggest, is a world phone, a great smartphone with a very good an improved physical QWERTY keyboard, it offers Quad Band GSM. Motorola Droid 2 Global has a super-fast 1.2 GHz processor and a superior security for all your business need.
Motorola-Droid-2-Global
But if you want more from it, you have to ROOT your Motorola Droid 2 Global, and to put the latest update ICS 4.0 OS. In this way you’ll be able to enjoy of more functionality improvements and to obtain a lot of speed.
NOTE: Use this guide at your own risk. We will not be held liable for any damage on your device as a result of using this guide.
First is very important to know is necessary to take these precautions in consideration:
  • Backup your phone’s data and be sure the charge the battery to at least 80%.
  • Enable USB Debugging on your smartphone. (Settings > Applications > Development) and tick the USB Debugging option.

How to Root the Motorola Droid 2 Global 2 running Android 2.2 Froyo

  1. Go to Download the z4root APK application package, copy it into your smartphone’s memory and install it.
  2. Once the installation is done, go to launch the z4root app on your phone.
  3. Press the Permanent Root button, the application will root your phone. (BusyBox will be installed as well).
  4. After that the phone will reboot afterwards. In next step go to verify if the rooting process was successfully by running the z4root app again, if you’ll see Re-root and Un-Root buttons, this means your smartphone is already rooted.

  How you Root the Motorola Droid 2 Global running on Android 2.3 Gingerbread:

  1. For this procedure you need a Windows PC.
  2. First must to install the Motorola USB drivers on your Windows PC . The drivers are available here: for 32-bit Windows  and for  64-bit Windows
  3. Download Pete’s Motorola Root Tools and go to extract the files in your windows computer.
  4. Connect the Droid 2 Global device to the PC.
  5. Launch Pete’s rooting app(double-click on Pete’s Motorola Root Tools.exe located where you extracted the files)
  6. Click on the Root My Phone button.
  7. Now wait approximate 3 minutes, your device will restart and you’re ready to go.
Note: If you want to Unroot your phone, only go to click the Unroot My Phone button.
ReadHere..

Install I9300XXUGML3 Official Firmware on Galaxy S3 to Android 4 3 Guide

A new firmware is now available for global variant of Galaxy S3 devices; it is about of the new Android 4.3 I9300XXUGML3 Official Firmware.
The new firmware has been released as an OTA (Over-The-Air) update and trough Samsung KIES application (servers) in several regions and countries including Indonesia, Philippines, Malaysia, Vietnam, Singapore and Thailand.
The new update is based on Android 4.3 platform, and its build date is on Dec 26, 2013. Its specifications include PDA: I9300XXUGML3, MODEM: I9300DXUGMK1 and MODEM: I9300DXUGMK1. In Additional, the new update can be flashed on any unlocked Galaxy S3 GT-I9300 devices by using a manually step by step guide. That’s why we will provide you a step by step guide where you’ll teach how easily install the new Android 4.3 I9300XXUGML3 official firmware on Galaxy S3 device.
Pre-requisites and guidelines to follow before to install the new firmware:
  • Android Source Team provide this guide for educational and instructional purpose, so we will not be held liable or responsible for any data lost or damage to the device during or after the ROM installation. Apply this guide only on your own risk.
  • Download and install suitable USB Drivers for Samsung Galaxy S3 device on the PC. Download link for USB Drivers here.
  • Enable the USB Debugging Mode on the smartphone from Settings>Developer Options.
  • A full backup is required to avoid potential data delete or corruption, so backup all your important data stored into Galaxy S3 device’s internal memory.
  • The Galaxy S3 device should be factory unlocked, not locked in any specific carrier.
  • Ensure that the device’s battery has more than 85 % power left.
  • The new official Android 4.3 (I9300XXUGML3) firmware is fully compatible with all Galaxy S3 GT-I9300 devices only. Do not use this firmware in any other incorrect versions of Android devices as it may damage or brick your device.
  • To be sure about the device model verify this by navigating to Settings>>About Phone.

How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:

  1. Download Android 4.3 XXUGML3 JB Firmware for Samsung Galaxy S3 I9300 device.
  2. Download ODIN application from here.
  3. Now, extract the downloaded Android 4.3 JB firmware to obtain a .tar.md5 file and some other additional files.
  4. Now, extract the ODIN archive to get ODIN3 v3.07.exe and some other files.
  5. Turn off the Samsung Galaxy S3 device.
  6. Boot it into Download Mode. (Press and keep holding the Volume Down, Home and Power buttons in the same time until an Android icon with together with a warning triangle will be displayed on the screen and then press once again the Volume UP button).
  7. Open the ODIN application on PC as an Administrator.
  8. Now, by using the USB cable with the device in Download Mode connect the Samsung Galaxy S3 device.
  9. When the ODIN application detects the S3 device a “Added” message will appear on the display and the ID:COM box with the COM port number will turn light blue. If the “Added” message fails to be displayed try to reinstall once again the USB drivers.
  10. Now, load the extracted files in ODIN application from the extractedI9300XXUGML3 firmware folder:
    • ·         From ODIN tap on PDA button and from there select the .tar.md5 file.
    • ·         From ODIN, tap PDA button and select the .tar.md5 file.
    • ·         From ODIN select the CSC button and chose the file named CSC.
    • ·         From ODIN click PIT button and select the file with the .pit extension.
    ·         Note: if the MODEM, CSC and .pit files are not found you should ignore these steps.
  11. In ODIN application select Auto Reboot and F. Reset Time options. The Re-Partition option must rest checked only if you have a .pit file in the previous steps.
  12. Now, verify once again all the steps to be done correctly.
  13. Press on START button in ODIN to start the flashing process.
  14. Once the new official firmware is completely installed a “PASS” message with a green color on the background will be displayed in the left top of ODIN application.
  15. After that the Samsung Galaxy S3 device will get an automatically reboot to the Home screen.
  16. Disconnect the USB cable from the PC.
  17. These were all the steps in order to install the new official Android 4.3 I9300XXUGML3 JB firmware.
  18. Verify the OS version from Settings>About Phone.
Troubleshooting:
If the Samsung Galaxy S3 I9300 device is stuck on the first boot animation you need to:
Boot the device into Recovery Mode by pressing and keep holding the Volume UP and Power buttons in the same times.
From the Recovery Mode perform Wipe data/Factory Reset and Wipe Cache Partition operations.
Return to the main menu of the Recovery Mode and choose Reboot System Now option.
Note: Into Recovery Mode menu you need to use the Volume Keys to navigate between its options and the Power key to select the options that you want to use.
Important: the data wipe task will erase your entire device’s internal memory but not external SD card data.  So by knowing that, you need to ensure that you get a full backup for all your critical data.
ReadHere..

Sunday, October 5, 2014

How to Root Micromax Canvas Knight A350

I amsharing How to Root Micromax Canvas Knight A350 with easy method which is help on rooting your Micromax Canvas Knight A350 Android Mobile easily.

Micromax Canvas Knight A350 Key Features:
    2 GB RAM with 32 GB Internet Memory
    16 MP Primary Camera with LED Flash and 8 MP Secondary Camera
    5 Inches IPS LCD Touch Screen
    Android 4.2.2 Jelly Bean OS
    2 GHz Cortex A7, Mediatek MT6592T Processor
    Dual SIM

How to Root Micromax Canvas Knight A350

1. Download Framaroot.Apk file
2. After that Install on your Micromax Canvas Knight A350
3. Now Open Framroot App and click on Grant when SuperSU ask for permission
4. Now click on Boromir Button
5. And wait for completion of process
6. After completion of Process, your Android Mobile will be rooted
7. Download Root Checking App and check your Mobile is root or not.
ReadHere..

Thursday, September 25, 2014

How to Share Content with DLNA Certified Devices on Sony Xperia Z1 Compact

Playing files from DLNA Certified™ devices on your device

When you play files from another DLNA Certified™ device on your device, this other device acts as a server. In other words, it shares content over a network. The server device must have its content sharing function enabled and give access permission to your device. It also must be connected to the same Wi-Fi® network as your device.

To play a shared track on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap , then find and tap WALKMAN.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the track that you want to play. The track starts playing automatically.

To play a shared video on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap , then find and tap Movies.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the video that you want to play.

To view a shared photo on your device

1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap .
3. Find and tap Album > My albums. All your available online albums and connected devices are displayed.
4. Select a device from the list of connected devices.
5. Browse the folders of the connected device and select a photo to view it.

Preparing to play content from your device on DLNA Certified™ devices

You must set up file sharing on your device first before you can view or play media files from other DLNA Certified devices. Your device works as a media server when it makes content available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.

To stop sharing files with other DLNA Certified™ devices

1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.

To set access permissions for a pending device

1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Pending devices list.
4. Select an access permission level.

To change the name of a registered device

1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list, then select Change name.
4. Enter a new name for the device.

To change the access level of a registered device

1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list.
4. Tap Change access level and select an option.

To get help about sharing content with other DLNA Certified™ devices

1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Tap Question mark icon.






ReadHere..

Tuesday, September 23, 2014

How To Windows Automatic Shutdown Windows Vista 7 and Windows 8

Windows
Windows Automatic Shutdown
This guide is for all Windows users who want to configure their Computer, Laptop or PC to automatically shut down at specific time. The tutorial is working fine for all versions of Windows such as Windows Vista, Windows 7 and latest Windows 8. The feature of automatic shut down comes to use when you want your computer to automatically shut down at some specific time of the day. You can choose various options according to your needs such as how many times you want your computer to auto shutdown, once a week, at some specific day etc.
Also Read: How to Recover Files in Windows
Following is the simple and easy to follow tutorial given for Windows users to automatically shut down their Personal Computer or Laptop. The basic steps for each Windows (Vista, Windows 7 and Windows 8) are same, though there may be some small variations at some steps according to your Windows version. In this tutorial, we are going to use an official tool provided by Microsoft in all Windows. This is known as Task Scheduler. It is very simple to use and also very useful. So, you dont have to download any third party software or programs to automatically shut down your computer. Following are the simple and easy to follow tutorial.
Recommended Read: How to Make Your Computer Respond to Your Voice Commands

How to Schedule Auto Shutdown in Windows Vista, Windows 7 and Windows 8

  • In Windows Vista and 7, click on start button, type Task Scheduler and hit enter. Or you can run Task Scheduler from the control panel. In Windows 8, open control panel, Click on System and Security and then Administrative tools.
  • Now find and Run the program in the list - Task Scheduler.
  • A new Window will open. Click on create a basic task.
  • Complete the first step by entering any desired name and description for the task. Here we are going to use Auto Shutdown as name and Shut Down My PC at 12:00 AM as description.
  • Now click on next and you will be asked for When do you want to start the task? This is trigger section. Select your appropriate option and click next. For example, we have selected Weekly option from the list.
  • Now configure your selected option. In our example, we have chosen the shut down time (12:00 AM) and the days at which computer will automatically shut down.
  • Now you will be at Action window. Choose Start a Program from the list and click on next.
  • In the text field of Program/Script, type the following: C:WindowsSystem32Shutdown.exe and click on next.
  • Now check your task details and click on Finish.
  • From now, your computer will shut Automatically according to your selected options
ReadHere..

Sony XPERIA Ion LT28H Update To Android 4 1 2 Done How To Guide

How To Sony XPERIA Ion LT28H Update To Android 4.1.2 Done Guide
how to install the newest Android 4.1.2 for Sony XPERIA Ion LT28h a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial) b) download and install latest Flashtool from here (mirrors Google Drive or Mega)c) download also latest Android 4.1.2 (mirror) for Sony XPERIA Ion LT28h d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data. f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button g) after few minutes all is done and your phone gets the new firmware
ReadHere..

Monday, September 22, 2014

How to Install Samsung Galaxy S Duos 2 S7582 with Android 4 2 2 DDUANC1 Jelly Bean Official Firmware Using Odin Guide


Samsung Galaxy S Duos 2 (GT-S7582) has already received a new Android 4.2.2 Jelly Bean update with firmware build number S7582DDUANC1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7582DDUANC1
CSC: S7582ODDANC1
MODEM: S7582DDUANC1
Version: Android 4.2.2
Build date: Mar 13, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka
Samsung Galaxy S Duos 2 S7582 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 DDUANC1 Jelly Bean firmware is compatible only with the Galaxy S Duos 2 (GT-S7582). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 DDUANC1 Jelly Bean Firmware (Mirror Link) for Galaxy S Duos 2 S7582
2. Odin 3.07
Steps to Update Galaxy S Duos 2 S7582 with Android 4.2.2 DDUANC1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S Duos 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Select the following files in Odin from extracted S7582DDUANC1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy S Duos 2 S7582 should be now updated with Android 4.2.2 DDUANC1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy S Duos 2 S7582 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Read also: How to Root Galaxy S Duos 2 S7582 on Android 4.2.2 Jelly Bean and Install CWM Recovery
ReadHere..

Friday, September 19, 2014

How To Hard Reset BlackBerry 8120

Hard Reset BlackBerry 8120

Delete all device data
Verify that you have a backup copy of your BlackBerry® device data.

CAUTION: If you have turned on content protection, the process for deleting all device data can take up to an hour to complete. You cannot stop the process after you start it. If you reset your device, the process continues after the device restarts.
  1. In the device options, click Security Options. 
  2. Click General Settings. 
  3. Press the Menu key. 
  4. Click Wipe Handheld. 
  5. To delete all third-party applications from your device, select the Include third-party applications check box. 
  6. Click Continue. 
  7. Type blackberry and OK.
ReadHere..

How To Easy Update Official Stock ROM For Karbonn A9 Smartphone

Karbonn A9 + merupakan smartphone android populer di India. Jika Anda ingin memperbarui dengan resmi stock ROM tindak tutorial ini.


Pre requisites:

  • Before start to update your phone, charge your phone upto 75% or more. So, then it never get switched off during the middle of the rooting process due to low battery. If it happens, this could damage your device. So, try to charge your phone completely, before initiate the updating process.
  • All of us stored some important or personal datas on our phone. By trying rooting process they may get deleted. So, before begin the rooting process, take a backup of all the datas as you feel it is important for future use “especially contact numbers”.
  • Next enable the USB Debugging mode option in your phone by following the path “Settings > Applications > Development > USB Debugging”. This is very much important so then your Karbonn A9+ smartphone can communicate with the computer.


Disclaimer : Please be aware that the given below updating procedure will void the manufacturer warranty of your phone. Although, the given below methods are safe it may brick your phone, in case you attempt any mistake so liability will be yours. I won’t be held responsible for that.


How to install the Stock ROM:
  • First, download either one of the link from below and place the downloaded file to your SD card

  1. Both the link will lead you to same stock ROM, so download any one. The ROM will be flashable .zip archive, don’t extract it.
  2. After that place the downloaded ROM to your SD card. Press and hold the Power button and Volume Up button for few seconds until it display a green Lcd.
  3. Release the button when it shows the red Lcd.
  4. Now you should have booted your mobile into the recovery mode, from there make a factory reset.
  5. After that select the apply update from the external storage and select the ROM file from SD card (Volume Key-Move up/Down, Power Key-Select).
  6. Wait for few minutes to flash the update.
  7. Once the process is finished, select the reboot system now option.
That’s it! Now, you have successfully installed the stock ROM on your Karbonn A9+ smartphone.
ReadHere..