Love Solution

iPhone 5 Battery Replacement

Step 1 — Front Panel Assembly

• Before disassembling your iPhone, be sure it is powered off.
• Remove the two 3.6 mm Pentalobe screws next to the Lightning connector.

Step 2

• Press a suction cup onto the Lcd, just above the home button.
• Be sure the cup is completely on the Lcd to get a tight seal
• Step 3
  
  Make sure the suction cup is firmly attached to the front panel assembly.
  
  While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
  
  Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.
  
  With a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while you pull up with the suction cup.
  
  There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

Walton C2 Full Short Problem Solution 100% Tested,walton C2 Dead Problem Solution,Walton C2 Not Power On Problem Solution Ways 100% Tested

Nokia Mobile X6 Full PCB Diagram Mother Board.
Here is the diagram of Nokia Mobile X6 PCB.so i will add some more diagram in high resolution so that you can add some more repairing trick for

 Nokia Mobile X6 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible “REPAIRING MADE EASY” the basic point of blogspot.com
Thanks

if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.