Showing posts with label jumpers. Show all posts
Showing posts with label jumpers. Show all posts
Saturday, November 15, 2014
nokia c1 01 c2 1616 1280 light 10000 working jumpers
nokia c1 01 c2 1616 1280 light 10000 working jumpers
Friday, November 14, 2014
Nokia C2 06 Lcd Display Problem Solution Ways Jumpers
Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, November 13, 2014
Nokia 111 LCD Display Problem Ways Jumpers
Nokia 111 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 111 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.
![]( "Nokia")
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
ReadHere..
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Wednesday, November 12, 2014
Nokia x2 hand free open problem jumpers solution
Nokia X2-00 handfree problem, hand free singe, hand free open, can be solve with this diagram that I am going to post in this post bellow. look at the diagram and these two ic and there near about area if you find some rust water damage or carbon here you can clean the board and dry it.
Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in nokia X2-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution. some related post are also given bellow you can read them also for more information about cell phone.
ReadHere..
Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in nokia X2-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution. some related post are also given bellow you can read them also for more information about cell phone.
Thursday, November 6, 2014
Nokia Asha 300 Ringer Problem Solution jumpers
Nokia Asha 300 ringer problem can be solve with a few steps that are given in diagram bellow so look at diagram bellow to solve love ringer voice, no ringer tones, no ringer working problems in nokia asha 300.in diagram there are two colors blue and red both colors are defining path of circuit in mobile phone.
![]( "Nokia")
Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attaché after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in nokia asha 300.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attaché after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in nokia asha 300.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Wednesday, October 29, 2014
Nokia C5 06 Display Problem Lcd Solution Jumpers
If you have display problem, White or blank display, Lcd problem in Nokia C5-06. All these problems can be sort out and to be fix with a few tips and diagnostics that I am going to write in this post.nokia Asha 202 Camera Problem Solution Jumper Ways
A diagram to repair Nokia C5-06 display problem is also attached with this post as above.After dis assembly of Nokia C5-06 try to replace lcd. If lcd replacement can not solve display problem in Nokia C5-06.
Check all these tracks that are given in above Display repairing diagram for Nokia C5-06. These different color lines are identifying the paths and components that are used in display function of Nokia C5-06.
Check all these parts with meter and if any of them is missing or damage apply jumpers as given in above diagram for Nokia C5-06 blank lcd white display or no display solution.
This diagram is sent to us by one of our guest poster and it is taken from gem-flash a gsm portal.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
ReadHere..
A diagram to repair Nokia C5-06 display problem is also attached with this post as above.After dis assembly of Nokia C5-06 try to replace lcd. If lcd replacement can not solve display problem in Nokia C5-06.
Check all these tracks that are given in above Display repairing diagram for Nokia C5-06. These different color lines are identifying the paths and components that are used in display function of Nokia C5-06.
Check all these parts with meter and if any of them is missing or damage apply jumpers as given in above diagram for Nokia C5-06 blank lcd white display or no display solution.
This diagram is sent to us by one of our guest poster and it is taken from gem-flash a gsm portal.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Saturday, October 18, 2014
Nokia Asha 311 Mic Problem Jumpers Ways Solution
Nokia Asha 311 have mic problem our voice can not reach to destination and we can not record voice in it.mic problem can be reason of parts damages or carbon rust and water damages.so to solve this issue in Nokia Asha 311 look at diagram bellow and check all these components and parts.these parts are used in Microphone function in Nokia Asha 311.Nokia C2-01 ringer problem solution jumper ways see All cellular mobile repair solution
once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia Asha 311.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia Asha 311.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Monday, September 22, 2014
Nokia Asha 311 Mic Problem Jumpers Ways Solution
Nokia Asha 311 Mic Problem Jumpers Ways Solution
if Nokia Asha 311 have mic problem our voice can not reach to destination and we can not record voice in it.mic problem can be reason of parts damages or carbon rust and water damages.so to solve this issue in Nokia Asha 311 look at diagram bellow and check all these components and parts.these parts are used in Microphone function in Nokia Asha 311.
![Nokia]()
once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia Asha 311.
once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia Asha 311.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Tuesday, September 9, 2014
Nokia Asha 201 Insert Sim problem Solution Jumpers
Asha 201 insert sim 1, nokia Asha 201 insert sim 2 solution, nokia Asha 201 sim 2 insert sim, 100 sim solution, nokia Asha 201 insert sim2 100 tested solution, nokia Asha 201inset sim 100, nokia Asha 201 insert sim, u2u nokia 100 insart sim, nokia 100 sim, nokia Asha 201 inser sim solution, nokia Asha 201insat sim problem, nokia Asha 201 insart sim solution, nokia Asha 201 insert 1 and 2 solution
Nokia Asha 201 insert sim solution 100 % tested solution nokia Asha 201 insert sim solution , nokia Asha 201 insert sim 1 solution , nokiaAsha 201insert sim solution ,, Asha 201 insert sim 2 solution , nokia Asha 201 sim 2 insert solution , nokiaAsha 201 insert sim solution , nokia Asha 201 insert sim 2 , nokia Asha 201 insert sim final solution, nokia Asha 201 sim 2 100 solution, insert sim nokia Asha 201 test 100, nokia Asha 201 insert sim 2 solution all links ok,
Wednesday, September 3, 2014
5250 Volume Keys Ways Jumpers
Nokia 5250 Volume Keys prints are broken the diagram below can help
you.
If your Nokia 5250 Volume Keys prints are broken the following diagram
can help you. If prints are fine then your Volume buttons are probably
busted replace them. I have marked both Volume Up an Down keys jumpers
in the following diagram.
Please Note that we will edit these solutions or add new ones if found
in this page at any time in the future. So feel free to come back any
time on this page to stay up to date.
If you have further Questions please don't hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one
member of our team. Use the information available here at Your Own
Risk. We are not responsible if any harm comes to your device during
the repairing process.
Tuesday, August 26, 2014
Friday, August 22, 2014
5250 Battery Connector Ways Jumpers
connector prints of Nokia 5250 are broken I have marked their ways in
the following diagram.
This solution if pretty much self explanatory its just Nokia 5250
Battery Connector Ways jumpers points marked in the diagram below.
Bottom Point marked with red jumper is Positive and Middle is
Black(Ground) and the Top is Green(BSI)
Please Note that we will edit these solutions or add new ones if found
in this page at any time in the future. So feel free to come back any
time on this page to stay up to date.
If you have further Questions please don't hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one
member of our team. Use the information available here at Your Own
Risk. We are not responsible if any harm comes to your device during
the repairing process.
Saturday, August 9, 2014
Nokia X6 LED LCD light problem solution jumpers ways
Nokia Mobile X6 with Blank Display, Blinking Display, Display Light Jumpers, Display Light Problem, Display Light How to Fix problem, Display Light Ways, Keypad Light, LCD Display Light, Nokia Mobile, White Display
If the light is not workin in the X6 and LCD monitor or keyboard did not work then you can solve this problem by following these few steps that I am writing this post.
just look at the schedule given by post in there are two lines going from LCD jack check this links and also verify that all components are enlined with multi colors all these parts are used in LED lighting and LCD light function in the Nokia Mobile x6.so replacement this or parts supplied to LED Light problem and dim-lit LCD display problem in the X6.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
If the light is not workin in the X6 and LCD monitor or keyboard did not work then you can solve this problem by following these few steps that I am writing this post.
just look at the schedule given by post in there are two lines going from LCD jack check this links and also verify that all components are enlined with multi colors all these parts are used in LED lighting and LCD light function in the Nokia Mobile x6.so replacement this or parts supplied to LED Light problem and dim-lit LCD display problem in the X6.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information
Subscribe to:
Posts (Atom)