Love Solution

Showing posts with label 3. Show all posts

Monday, November 17, 2014

Samsung Galaxy Note 3 SM N900 Simple Tutorial How To Root N900UBUDNB2 Android 4 4 2 KitKat Firmware

Root Galaxy Note 3 SM-N900 Running N900UBUDNB2 4.4.2 KitKat through Odin:

Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 3 N900 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
Finally, click on the Start button to begin the rooting process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

ReadHere..

Sunday, November 16, 2014

How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone.

ReadHere..

Thursday, October 23, 2014

Install I9300XXUGML3 Official Firmware on Galaxy S3 to Android 4 3 Guide

A new firmware is now available for global variant of Galaxy S3 devices; it is about of the new Android 4.3 I9300XXUGML3 Official Firmware.

The new firmware has been released as an OTA (Over-The-Air) update and trough Samsung KIES application (servers) in several regions and countries including Indonesia, Philippines, Malaysia, Vietnam, Singapore and Thailand.

The new update is based on Android 4.3 platform, and its build date is on Dec 26, 2013. Its specifications include PDA: I9300XXUGML3, MODEM: I9300DXUGMK1 and MODEM: I9300DXUGMK1. In Additional, the new update can be flashed on any unlocked Galaxy S3 GT-I9300 devices by using a manually step by step guide. That’s why we will provide you a step by step guide where you’ll teach how easily install the new Android 4.3 I9300XXUGML3 official firmware on Galaxy S3 device.

Pre-requisites and guidelines to follow before to install the new firmware:

Android Source Team provide this guide for educational and instructional purpose, so we will not be held liable or responsible for any data lost or damage to the device during or after the ROM installation. Apply this guide only on your own risk.
Download and install suitable USB Drivers for Samsung Galaxy S3 device on the PC. Download link for USB Drivers here.
Enable the USB Debugging Mode on the smartphone from Settings>Developer Options.
A full backup is required to avoid potential data delete or corruption, so backup all your important data stored into Galaxy S3 device’s internal memory.
The Galaxy S3 device should be factory unlocked, not locked in any specific carrier.
Ensure that the device’s battery has more than 85 % power left.
The new official Android 4.3 (I9300XXUGML3) firmware is fully compatible with all Galaxy S3 GT-I9300 devices only. Do not use this firmware in any other incorrect versions of Android devices as it may damage or brick your device.
To be sure about the device model verify this by navigating to Settings>>About Phone.

How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:

Download Android 4.3 XXUGML3 JB Firmware for Samsung Galaxy S3 I9300 device.
Download ODIN application from here.
Now, extract the downloaded Android 4.3 JB firmware to obtain a .tar.md5 file and some other additional files.
Now, extract the ODIN archive to get ODIN3 v3.07.exe and some other files.
Turn off the Samsung Galaxy S3 device.
Boot it into Download Mode. (Press and keep holding the Volume Down, Home and Power buttons in the same time until an Android icon with together with a warning triangle will be displayed on the screen and then press once again the Volume UP button).
Open the ODIN application on PC as an Administrator.
Now, by using the USB cable with the device in Download Mode connect the Samsung Galaxy S3 device.
When the ODIN application detects the S3 device a “Added” message will appear on the display and the ID:COM box with the COM port number will turn light blue. If the “Added” message fails to be displayed try to reinstall once again the USB drivers.
Now, load the extracted files in ODIN application from the extractedI9300XXUGML3 firmware folder:
- · From ODIN tap on PDA button and from there select the .tar.md5 file.
- · From ODIN, tap PDA button and select the .tar.md5 file.
- · From ODIN select the CSC button and chose the file named CSC.
- · From ODIN click PIT button and select the file with the .pit extension.
· Note: if the MODEM, CSC and .pit files are not found you should ignore these steps.
In ODIN application select Auto Reboot and F. Reset Time options. The Re-Partition option must rest checked only if you have a .pit file in the previous steps.
Now, verify once again all the steps to be done correctly.
Press on START button in ODIN to start the flashing process.
Once the new official firmware is completely installed a “PASS” message with a green color on the background will be displayed in the left top of ODIN application.
After that the Samsung Galaxy S3 device will get an automatically reboot to the Home screen.
Disconnect the USB cable from the PC.
These were all the steps in order to install the new official Android 4.3 I9300XXUGML3 JB firmware.
Verify the OS version from Settings>About Phone.

Troubleshooting:

If the Samsung Galaxy S3 I9300 device is stuck on the first boot animation you need to:

Boot the device into Recovery Mode by pressing and keep holding the Volume UP and Power buttons in the same times.

From the Recovery Mode perform Wipe data/Factory Reset and Wipe Cache Partition operations.

Return to the main menu of the Recovery Mode and choose Reboot System Now option.

Note: Into Recovery Mode menu you need to use the Volume Keys to navigate between its options and the Power key to select the options that you want to use.

Important: the data wipe task will erase your entire device’s internal memory but not external SD card data. So by knowing that, you need to ensure that you get a full backup for all your critical data.

ReadHere..

Wednesday, September 17, 2014

How To Root I535VRUCML1 Verizon Galaxy S3 SCH I535 Android 4 3 JB Firmware

Warning: This tutorial is only for Verizon Galaxy S3 SCH-I535. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:
Though root don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation.

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Verizon Galaxy S3 SCH-I535 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Verizon Galaxy S3 SCH-I535.

5. This method may require a bootloader unlocked device.

How To Root I535VRUCML1 Android 4.3 Jelly Bean On Verizon Galaxy S3 SCH-I535

Download Odin v3.09 and root file for I535VRUCML1.
Extract CF-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Verizon Galaxy S3 SCH-I535 in Download Mode by pressing and holding down the Volume Down, Home and Power button together. A warning Lcd will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button (PDA button for old Odin), and select that CF-Auto-Root-d2vzw-d2vzw-schi535.tar.md5 file that you get in Step 2.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Verizon Galaxy S3 SCH-I535 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just rooted Samsung Verizon Galaxy S3 SCH-I535 running on I535VRUCML1 Android 4.3 Jelly Bean firmware. To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store.

ReadHere..

Thursday, September 11, 2014

NCK Box v3 3 Update Released 14 11 2013

Huawei Modem

B153 WebCube - Unlimited Unlock Code Calculation via IMEI

ZTE

G-S218 - Unlimited Unlock Code Calculation via IMEI

Alcatel - Unlimited Unlock Code Calculation via IMEI & PID

OT995

Code:

PMPT3

4030X

Code:

TBHR2
HWIE1
TBHU2
M9MZ1
TBDE2
TMCV1
TBDE1
TNBG1
TEHR1
OBIE1
DCFA3
TBGB1
TBNL2
VIHI1
RGRE3

4030D

Code:

N1RU1
VPLK1

OT-4030E

Code:

SPPH1
C2PH1

OT-4033x

Code:

TNBG1
VIHI1
RGCH1
N1RU3
ALIT1
ALEU1
DHMY1

OT-4033E

Code:

VDFJ1
ALTH1
ALLK1
VPLK1
C2PH1
ALMX1
P5IN3

OT-4033D

Code:

ALCH1
ALBE1
ALGR1
ALRS1
ALHU1
ALVN2
ALEU1
ALIT1

OT-5020T

Code:

VHCA1
WNCA1

OT-6030 [X - A - E]

Code:

EKES1
AVUY1
AVCR1
ANES1
AEUY1
TEHR1
TBAT1
TBBG1
RGFA1
VDMK1
CFMK1
VVBG1
BYFR3
TBDE1
TBBG1
TBSK1
TBDE2
TBMK1
TBRO1
TBCZ1
TBGR1
TBHR1
TBHU1
WNIT1
C9SV1
TBNL1
TBPL1
SBSI1
C2PH1
AVCL1
SPPH1
WCDO1
TLCL1
AVPY1
AVDO1
AVCO1
SJIN1
D5SI1
MPBG1
NSAR2
C9PC1
VNRS1
ATTE1
TGMX1
C9JM1
MVGT1
MVBO1
NNEC1
2DNZ1
LDUS1
AVPA1
BHBA1
TLAR2
AVHN1
AVGT1
AVSV1
TBPL2
RGES3
RGPL3
RGSK3
RGRO3
PMPT3
TLES3
PSAR2
AVNI1
TLUY1
AVPE1
SPPH1
RGCH1

OT-6030D

Code:

N3MY1
VPIN1
BGGE1
GWIN1
MSAM1
RGTE1
SFRE1

OT-6040 [X - A - E]

Code:

ALTH1
ALHR1
ALDE1
ALHU1
ALME
ALFR1
RGDO1
ALAP
ALRU1
ALBY1
ALTM1
ALRS1
KSKH1
TNME1
TNRS1
N3MY1
HHTW1
EECL1
AVCO1
AVDO1
TGMX1
TLCL1

Download From Official Support Area:

NCK BOX

ReadHere..

Thursday, September 4, 2014

Uni Android Tool V 3 01 Free Download

Uni-Android Tool V-3.01 Fully Powered With Wipe Data Factory Reset China Spd Cpu

Uni-Android Tool V-3.01
Multi Operational Tool for Androids

DOWNLOAD

ReadHere..

Tuesday, September 2, 2014

How to Easily Root Your LG G Pad 8 3 With Guide

Have you bought the new LG Android based tablet? Yes I’m talking about the G Pad 8.3, a great handsets that combines high end specs and features with an impressive design and affordable price tag. Anyway, if you have bought this device, then probably you are looking into a suitable root method. Why to root a handset that is already offering high end performances? Well, we will talk about this and about other relevant aspects below, so before heading to the proper root solution, check the following lines.
So, why to gain root access on the LG G Pad 83? The reasons are many, but we will detail only the most relevant ones. First, you need to gain root access because probably you will want to install a custom ROM firmware. The LG G Pad 8.3 is not a Nexus handset which means that the tablet is running Android Jelly Bean OS and not Android 4.4 KitKat firmware. Also, the OTA KitKat update is expected only next year, on February or March, so you will probably want to test the latest features, apps and capabilities ahead of official release of Android 4.4 and for doing that you will need to flash a custom ROM, thus gaining root access.
Furthermore, if you want to apply a custom firmware, first you will have to flash a custom recovery image, like CWM or TWRP recovery. As you can already tell, in that case root access must be granted on your G Pad 8.3. We can go on with these examples as root is required also when trying to remove the bloatware, to install a custom kernel, to overclock the CPU, to install custom apps from Google Play, to remove or add features or inbuilt programs and so on. Basically, on a rooted device you can improve the performances, upgrade the battery life, bump the speeds, change the classic Android UI and lot more.
But, on the other hand, you should know that there are negative aspects too. For example, when gaining root access you are applying an unofficial operation that has nothing to do with Google or with LG. That’s why, if you complete this tutorial, the LG G Pad 8.3 warranty will get void. Also, if you root your tablet, when Android 4.4 OTA update will be rolled out you will not be able to receive the firmware – on a rooted handset the OTA updates can be only manually installed. As for the warranty, if you will need it back you will have to flash the stock Android software on your G Pad 8.3 by following a suitable step by step guide – then the root access will be revoked and the tablet restored to its initial state.
Good; so if you want to complete this tutorial the up mentioned info should be cleared on your mind. Now, the tool from below (the root package to be more precise) is being provided by those of xda-developers so we have to thanks them for this step by step guide. Now, before heading to the root procedure, you first have to prepare your tablet from what will shortly follow.
Start by making a backup. It is important to save your personal info and accounts as in some cases, when gaining root access the system is being wiped out, or the data corrupted. I recommend you to save the contacts, the internet settings, your personal accounts, data and info and market apps. Also, save anything else that’s saved on the internal storage memory of your LG G Pad 8.3 by using suitable backup and restore apps from Google Play – don’t worry as these tools are free distributed (you don’t have to spend your money on the download procedure).
A computer, your handset and its USB cable are being required for this process. For being able to connect the devices you will first have to enable the USB debugging option from your tablet – just go to “menu – settings – developer options”. Also, on your computer the G Pad drivers must be installed. If not, you can install the drivers manually by downloading the required files from here. Your computer shouldn’t be installed with antivirus tools. If there are antivirus or any other security programs installed, the best will be to deactivate the security protection before starting the root process – these tools might interfere with our work.
It is important to know that if your G Pad gets turned off in middle of root, your tablet might get bricked out. So, first of all check the battery status and if there is less than 50% power left, plug in the charger. Also, check the model number of your G Pad. This root solution works only for the LG G Pad 8.3 V500; don’t use the steps from below in case you own a different Android based device because this tutorial is compatible only with the mentioned tablet.
Perfect; you are now prepared for the proper root operation. Do remember that this procedure is complex, risky and unofficial. Because of that, for avoiding the unpleasant situations, stick to the steps from below. Don’t complete things by yourselves without consulting the guidelines from this tutorial because you can end up in bricking your LG GPad.

How to Easily Root LG G Pad 8.3

On your computer download the root file from here (the same package can be downloaded from here, or from here).
On your computer, preferable on desktop, unzip the downloaded root file.
On your G Pad enable the developer option; do that by going to settings – about phone and tap on built number (seven times).
Connect your tablet with the computer.
Use and plug in the USB cable in order to establish the connection.
Go to the root folder from desktop.
From there run the root.bat executable file.
It will push g_security to your SD-Card.
The process will be stopped.
At this point you need to unplug the USB cable; disable and re-enable the USB debugging option on your tablet as showed above.
Connect your handset with the computer once more.
Press any key to continue the root operation.
Now an alert message will be displayed. At this pint if you continue the warranty will get void.
Press ctr+c if you want to abort.
If not, follow the on-screen prompts.
Your tablet will be rooted.
In the end the Superuser.apk will be displayed in your app drawer.
Done.

That was all for now. Gaining root access on your LG G Pad 8.3 wasn’t hard, as the steps you had to complete were easy to follow. Anyway, if you have experienced issues or problems while applying the procedure from above, try to use this tutorial: “how to resolve most common Android issues”.
Now, as your tablet is finally rooted, you can test the new Android 4.4 KitKat firmware without waiting for the OTA to be rolled out. You can anytime install a custom ROM software on your G Pad and you can do even more as now your handsets is your new playground.

ReadHere..

Monday, August 25, 2014

How to Easy Root Galaxy S4 Canadian SGH I337M on Android 4 3 Jelly Bean Firmware

Samsung yang baru saja mulai meluncurkan Android 4.3 Jelly Bean mengupdate dengan firmware build number I337MVLUEMK6 untuk versi Kanada dari Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. Firmware baru resmi yang saat ini tersedia sebagai Over-The-Air (OTA) mengupdate serta melalui Samsung Kies.

Samsung Galaxy S4 (Kanada) user SGH-I337M yang telah diperbarui perangkat mereka dengan Android 4.3 Jelly Bean, dapat membasmi perangkat mereka menggunakan tutorial di bawah ini.

Tutorial ini menggunakan CF-Auto-Root berkas dirilis oleh Elite Diakui XDA Developers, Chainfire. File CF-Auto-Root yang memungkinkan pengguna Galaxy S4 untuk root dalam perangkat mereka kemudahan dalam tanpa beda menurut firmware. Ini benar-benar dukungan Android 4.3 Jelly Bean dan firmware mendatang sekaligus.

Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites

1. Install USB Drivers for Samsung Galaxy S4 on the computer.

2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. Ensure the battery of the phone is charged more than 80 percent.

5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required

1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)

2. Odin 3.07

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware

Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.

Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.

Step 3: Launch Odin on the computer as an Administrator.

Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.

Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.

Step 7: Double-check and click Start in Odin. The installation process will now begin.

Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

ReadHere..

Monday, August 18, 2014

How to Install N900PVPUBMJ4 4 3 Jelly Bean Firmware On SMN900P Sprint Galaxy Note 3

Sprint Samsung Galaxy Note 3 BC-N900P (USA) users can now update their devices to Android 4.3 firmware VPUBMJ4 official Jelly Bean which is being launched by Samsung. The latest firmware version N900PVPUBMJ4 built. The device that was released with Android 4.3 Jelly Bean and has been getting regular firmware updates. If you still need to update your device then update the latest official firmware N900PVPUBMJ4 Android 4.3 Jelly Bean on Sprints Galaxy Note 3. You can check the latest firmware available for your device via OTA (over the air) on your phone settings, go to Settings-General-About-Software Update.

For Samsung Galaxy Note 3 N900P comes with Android 4.3 Jelly Bean, you can only expect some additional bug fixes and performance improvements in this update. It is always recommended to update your device to the latest firmware when available.

If you do not already know, Android 4.3 Jelly Bean is equipped with many new features of Android Jelly Bean as the previous 4.2.2 Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control features for application such as mobile phones, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New Samsung keyboard, Changed the icon for a few Samsung apps, Fine TouchWiz, display Adapt, Adapt voice, full-screen mode in Samsung apps and more.

So, want to update to the Galaxy Note 3 N900P VPUBMJ4 latest firmware Android 4.3 Jelly Bean? There are two official ways to update the firmware, both check and update via OTA as mentioned above or download and update via Samsung Kies utility. However, if youre looking for a manual way to update the latest firmware VPUBMJ4 Android 4.3 on the Galaxy Note 3 N900P via Odin, then follow the step by step tutorial.

Important Note:
"The firmware is released only for the Samsung Galaxy Note 3 SM-N900P model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean N900PVPUBMJ4 Official Firmware Download List

USA (Sprint): N900PVPUBMJ4 N900PSPTBMJ4_SPR.zip | Link2

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N900PVPUBMJ4 official firmware on Galaxy Note 3 N900P.

How to Update Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 N900P via Odin:

Download Android 4.3 VPUBMJ4 Firmware for Galaxy Note 3 N900P from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy Note 3 N900P into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 3 N900P to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: N900PXXDLJ5_N900PODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you have done. Hope you successfully complete tutorial to update the firmware of Android 4.3 Jelly Bean officially VPUBMJ4 on Galaxy Note 3 BC-N900P. If youve followed everything in the tutorial as mentioned above, then your device should now be running on the latest Android 4.3 Jelly Bean VPUBMJ4 build version. You can verify the details of the firmware update from the Settings-General-About. If you have any questions, please feel free to contact with us using the comment form below and also share how you found the tutorial.

ReadHere..

Thursday, August 14, 2014

Samsung Galaxy Ace 3 S7270 Android 4 2 2 Jelly Bean Firmware Install Odin Guide Free Download

Samsung has rolled out Android 4.2.2 Jelly Bean Over-The-Air (OTA) update with firmware build number S7270XXUANA2 for the Galaxy Ace 3 with model number GT-S7270.
Firmware details
PDA: S7270XXUANA2
CSC: S7270OXEANA3
MODEM: S7270XXUANA2
Version: Android 4.2.2
Build date: Jan 09, 2014
Regions: Russia
Samsung Galaxy Ace 3 S7270 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA2 Jelly Bean firmware is compatible only with the Galaxy Ace 3 (GT-S7270). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUANA2 Jelly Bean Firmware for Galaxy Ace 3 S7270
2. Odin 3.07
Other regions: Southeast Asian (Indonesia, Singapore, Vietnam)
Steps to Update Galaxy Ace 3 S7270 with Android 4.2.2 XXUANA2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Select the following files in Odin from extracted S7270XXUANA2 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a

PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Samsung Galaxy Ace 3 S7270 should be now updated with Android 4.2.2 XXUANA2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Ace 3 S7270 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Click here to know How to Root Galaxy Ace 3 S7270 running on Android 4.2.2 Jelly Bean firmware.

ReadHere..

Pages

Monday, November 17, 2014

Sunday, November 16, 2014

Thursday, October 23, 2014

How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:

Wednesday, September 17, 2014

Thursday, September 11, 2014

Thursday, September 4, 2014

Tuesday, September 2, 2014

How to Easily Root LG G Pad 8.3

Monday, August 25, 2014

Monday, August 18, 2014

Thursday, August 14, 2014