Showing posts with label board. Show all posts
Showing posts with label board. Show all posts
Wednesday, August 20, 2014
Samsung Galaxy S 4G PCB Board Components Layout
Heres the Samsung Galaxy S 4G PCB board which shows the components and ICs mounted or used in the circuit. The major ICs used were labeled as a reference and familiarization of the entire PCB board layout.
Samsung Galaxy S 4G front PCB Motherboard IC Components:
Samsung Galaxy S 4G front PCB Motherboard IC Components:
Maxim MAX8987 DC Power Management
Samsung KB100L00WM-A453 4Gb (512 MB) of mobile DRAM which contains a 1 GHz Intrinsity Processor in a package-on-package configuration, according to the fine folks at
ST Ericssons THOR M5730 HSPA+ Thin Modem
ST Ericsson GNS7560 Single Chip GPS Solution
Bosch Sensortec Accelerometer
View the high resolution version of this image.
Samsung Galaxy S 4G Back PCB Motherboard IC Components:
Samsung KB100L00WM-A453 4Gb (512 MB) of mobile DRAM which contains a 1 GHz Intrinsity Processor in a package-on-package configuration, according to the fine folks at
ST Ericssons THOR M5730 HSPA+ Thin Modem
ST Ericsson GNS7560 Single Chip GPS Solution
Bosch Sensortec Accelerometer
View the high resolution version of this image.
Samsung Galaxy S 4G Back PCB Motherboard IC Components:
Broadcom BCM4329 802.11n Wi-Fi, Bluetooth 2.1, and FM Tuner
ST Ericsson RF5000 Radio Transceiver (part of THOR M570 chipset)
Wolfson Microelectronics WM8994 Audio CODEC
Skyworks SKY77447 Load Insensitive Power Amplifier for WCDMA / HSDPA / HSUPA / HSPA+ Band II
Skyworks SKY77544 TX-RX Front End Module
Skyworks SKY77460 WCDMA/HSPA+ Power Amplifier
View the high resolution version of this image.
The Samsung Galaxy S 4G compact front and rear camera assembly flex board.
It uses a NEC MC10170 Image Processor cleverly mounted right to its ribbon cable.
The Samsung Galaxy S 4G headphone jack, earpiece speaker, and proximity/ambient light sensors Flex cable.
The Samsung Galaxy S 4G headphone jack, earpiece speaker, and proximity/ambient light sensors Flex cable.
The removed button capacitive touch sensors, vibrator unit, lower microphone, and antenna cable connector mounted on the same flex assembly.
There you have it the labeled Samsung Galaxy S 4G PCB Board, Thats all folks!
Saturday, August 16, 2014
Nokia X6 Full PCB Wiring diagram Mother Board
Nokia Mobile X6 Full PCB Diagram Mother Board.
Here is the diagram of Nokia Mobile X6 PCB.so i will add some more diagram in high resolution so that you can add some more repairing trick for
Nokia Mobile X6 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible “REPAIRING MADE EASY” the basic point of blogspot.com
Thanks
Here is the diagram of Nokia Mobile X6 PCB.so i will add some more diagram in high resolution so that you can add some more repairing trick for
Nokia Mobile X6 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible “REPAIRING MADE EASY” the basic point of blogspot.com
Thanks
Subscribe to:
Posts (Atom)