Pages

Showing posts with label bean. Show all posts
Showing posts with label bean. Show all posts

Sunday, November 16, 2014

How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

 Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:
  1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
  6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone. 
ReadHere..
Posted by Unknown at 7:15 PM 0 comments
Labels: , , , , , , , , , , , , , , , ,

Monday, September 22, 2014

How to Install Samsung Galaxy S Duos 2 S7582 with Android 4 2 2 DDUANC1 Jelly Bean Official Firmware Using Odin Guide


Samsung Galaxy S Duos 2 (GT-S7582) has already received a new Android 4.2.2 Jelly Bean update with firmware build number S7582DDUANC1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7582DDUANC1
CSC: S7582ODDANC1
MODEM: S7582DDUANC1
Version: Android 4.2.2
Build date: Mar 13, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka
Samsung Galaxy S Duos 2 S7582 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 DDUANC1 Jelly Bean firmware is compatible only with the Galaxy S Duos 2 (GT-S7582). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 DDUANC1 Jelly Bean Firmware (Mirror Link) for Galaxy S Duos 2 S7582
2. Odin 3.07
Steps to Update Galaxy S Duos 2 S7582 with Android 4.2.2 DDUANC1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S Duos 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Select the following files in Odin from extracted S7582DDUANC1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy S Duos 2 S7582 should be now updated with Android 4.2.2 DDUANC1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy S Duos 2 S7582 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Read also: How to Root Galaxy S Duos 2 S7582 on Android 4.2.2 Jelly Bean and Install CWM Recovery
ReadHere..
Posted by Unknown at 8:45 PM 1 comments
Labels: , , , , , , , , , , , , , , , , , , ,

Monday, August 25, 2014

How to Easy Root Galaxy S4 Canadian SGH I337M on Android 4 3 Jelly Bean Firmware

Samsung yang baru saja mulai meluncurkan Android 4.3 Jelly Bean mengupdate dengan firmware build number I337MVLUEMK6 untuk versi Kanada dari Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. Firmware baru resmi yang saat ini tersedia sebagai Over-The-Air (OTA) mengupdate serta melalui Samsung Kies.

Samsung Galaxy S4 (Kanada) user SGH-I337M yang telah diperbarui perangkat mereka dengan Android 4.3 Jelly Bean, dapat membasmi perangkat mereka menggunakan tutorial di bawah ini.

Tutorial ini menggunakan CF-Auto-Root berkas dirilis oleh Elite Diakui XDA Developers, Chainfire. File CF-Auto-Root yang memungkinkan pengguna Galaxy S4 untuk root dalam perangkat mereka kemudahan dalam tanpa beda menurut firmware. Ini benar-benar dukungan Android 4.3 Jelly Bean dan firmware mendatang sekaligus.



Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
ReadHere..
Posted by Unknown at 8:45 AM 0 comments
Labels: , , , , , , , , , , , , , , ,

Monday, August 18, 2014

How to Install N900PVPUBMJ4 4 3 Jelly Bean Firmware On SMN900P Sprint Galaxy Note 3

Sprint Samsung Galaxy Note 3 BC-N900P (USA) users can now update their devices to Android 4.3 firmware VPUBMJ4 official Jelly Bean which is being launched by Samsung. The latest firmware version N900PVPUBMJ4 built. The device that was released with Android 4.3 Jelly Bean and has been getting regular firmware updates. If you still need to update your device then update the latest official firmware N900PVPUBMJ4 Android 4.3 Jelly Bean on Sprints Galaxy Note 3. You can check the latest firmware available for your device via OTA (over the air) on your phone settings, go to Settings-General-About-Software Update.

For Samsung Galaxy Note 3 N900P comes with Android 4.3 Jelly Bean, you can only expect some additional bug fixes and performance improvements in this update. It is always recommended to update your device to the latest firmware when available.

If you do not already know, Android 4.3 Jelly Bean is equipped with many new features of Android Jelly Bean as the previous 4.2.2 Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control features for application such as mobile phones, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New Samsung keyboard, Changed the icon for a few Samsung apps, Fine TouchWiz, display Adapt, Adapt voice, full-screen mode in Samsung apps and more.


So, want to update to the Galaxy Note 3 N900P VPUBMJ4 latest firmware Android 4.3 Jelly Bean? There are two official ways to update the firmware, both check and update via OTA as mentioned above or download and update via Samsung Kies utility. However, if youre looking for a manual way to update the latest firmware VPUBMJ4 Android 4.3 on the Galaxy Note 3 N900P via Odin, then follow the step by step tutorial.

Important Note:
"The firmware is released only for the Samsung Galaxy Note 3 SM-N900P model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean N900PVPUBMJ4 Official Firmware Download List


Pre-Requisites:


  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N900PVPUBMJ4 official firmware on Galaxy Note 3 N900P.
How to Update Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 N900P via Odin:

  1. Download Android 4.3 VPUBMJ4 Firmware for Galaxy Note 3 N900P from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Note 3 N900P into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900P to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: N900PXXDLJ5_N900PODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have done. Hope you successfully complete tutorial to update the firmware of Android 4.3 Jelly Bean officially VPUBMJ4 on Galaxy Note 3 BC-N900P. If youve followed everything in the tutorial as mentioned above, then your device should now be running on the latest Android 4.3 Jelly Bean VPUBMJ4 build version. You can verify the details of the firmware update from the Settings-General-About. If you have any questions, please feel free to contact with us using the comment form below and also share how you found the tutorial.
ReadHere..
Posted by Unknown at 9:45 AM 0 comments
Labels: , , , , , , , , , , , , ,

Thursday, August 14, 2014

Samsung Galaxy Ace 3 S7270 Android 4 2 2 Jelly Bean Firmware Install Odin Guide Free Download

Samsung has rolled out Android 4.2.2 Jelly Bean Over-The-Air (OTA) update with firmware build number S7270XXUANA2 for the Galaxy Ace 3 with model number GT-S7270.
Firmware details
PDA: S7270XXUANA2
CSC: S7270OXEANA3
MODEM: S7270XXUANA2
Version: Android 4.2.2
Build date: Jan 09, 2014
Regions: Russia
Samsung Galaxy Ace 3 S7270 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Ace 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUANA2 Jelly Bean firmware is compatible only with the Galaxy Ace 3 (GT-S7270). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUANA2 Jelly Bean Firmware for Galaxy Ace 3 S7270
2. Odin 3.07
Other regions: Southeast Asian (Indonesia, Singapore, Vietnam)
Steps to Update Galaxy Ace 3 S7270 with Android 4.2.2 XXUANA2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Select the following files in Odin from extracted S7270XXUANA2 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a  
 
PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
Samsung Galaxy Ace 3 S7270 should be now updated with Android 4.2.2 XXUANA2 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
 
Note: If Galaxy Ace 3 S7270 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Click here to know How to Root Galaxy Ace 3 S7270 running on Android 4.2.2 Jelly Bean firmware.
ReadHere..
Posted by Unknown at 10:30 AM 0 comments
Labels: , , , , , , , , , , , , , , ,
Subscribe to: Posts (Atom)