Sunday, November 16, 2014
Home »
3
»
4
»
android
»
bean
»
firmware
»
galaxy
»
how
»
install
»
jelly
»
lte
»
n7505l
»
n7505lubuanb1
»
neo
»
note
»
samsung
»
sm
»
to
»
How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware
How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware
Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:
- Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
- Download Odin 3.09
- Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
- In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Related Posts : 3,
4,
android,
bean,
firmware,
galaxy,
how,
install,
jelly,
lte,
n7505l,
n7505lubuanb1,
neo,
note,
samsung,
sm,
to
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment