Pages

Showing posts with label 4. Show all posts
Showing posts with label 4. Show all posts

Thursday, December 11, 2014

Way to Jailbreak iPhone 4 On iOS 5 1 With Redsnow Mac OS X


This tutorial will help you to jailbreak your iPhone 4 using Redsnow . First of all i tell you that it is tethered jailbreak so you have to connect your iPhone with Mac computer and re-run redsnow to boot your iPhone 4 into fully operational state every time your iphone loses power. I am also telling you that this jaolbreak will not work on iPhone 4S and that iBooks will not work correctly until iPhone Dev-Team implement a patch that will fix this.
To jailbreak follow these steps .

Step 1: To get started you will need to( download RedSn0w 0.9.1
0b6) on your Mac
Step 2: Once download process is completed start RedSn0w 0.9.10b6 launcher and click Jailbreak button located in middle of your window
Step 3: When the next window shows up, connect your iPhone 4 with your Mac using USB cable and power off your iPhone.


Step 4: When you are ready click Next button in existing window which will start DFU mode process


Step 5: When you click Next button simply follow instructions inside redsn0w window and continue clicking Next, after every step you perform on your iPhone (those steps you can find below)
  • Hold down the Power (corner) button for 3 seconds
  • Without releasing the Power button, also hold down the Home (bottom center) button for 10 seconds
  • Without releasing the Home button, release the Power button BUT KEEP holding the Home button for 15 seconds
Step 6: After you have successfully entered in DFU mode with your iPhone 4, redsn0w will begin preparing your iPhone 4 for the Jailbreak
Step 7: Once redsn0w is finished preparing your iPhone 4 for Jailbreak a new window will show up where you need to specify options to go along with Jailbreak. You can specify any option you want but I suggest you to choose only Install Cydia and click Next
Step 8: Once you click next the Jailbreak process will begin, DO NOT interrupt this process and wait until it’s finished. When jailbreak process is finished iPhone will boot up and stuck at Apple logo. If this happens to you it’s because this is a tethered jailbreak and you will need to boot tethered with redsn0w in order to make your iPhone work.
Step 9: To boot your iPhone using redsn0w lunch redsn0w again and click Extras button and then choose Just bootbutton
Step 10: After that you will simply need to put your iPhone into DFU mode again.
ReadHere..

Monday, November 17, 2014

Samsung Galaxy Note 3 SM N900 Simple Tutorial How To Root N900UBUDNB2 Android 4 4 2 KitKat Firmware

Root Galaxy Note 3 SM-N900 Running N900UBUDNB2 4.4.2 KitKat through Odin:
  1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
  4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
  6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your phone should automatically reboot after completion
  12. You can now disconnect your phone from computer
  13. Finish
ReadHere..

Sunday, November 16, 2014

How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

 Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:
  1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
  6. In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone
ReadHere..

Wednesday, November 5, 2014

30 Google Nexus 4 Tips and Tricks

Googles latest Nexus phone may be as hard to obtain as the Holy Grail at present, but that hasnt stopped us from getting our hands on one and testing it to destruction. As a result, were perfectly positioned to provide you with a quarter-century of indispensable Google Nexus 4 tips.


Below youll find 25 handy hints, which will enable you to get the most out of your bargain of a quad-core monster. Many of them will be relevant if you have another phone running vanilla Android 4.2 Jelly Bean.

1. Trace to type
One of Android 4.2s most significant new features is its trace-to-type keyboard. If youve used Swype in the past youll know what to expect. Instead of tapping on each key to write something, you merely draw a line over the letters in sequence and lift your finger from the screen to add a space and move onto the next word. To enable it, go to Settings > Language and Input, and select the Android Keyboard option. Make sure Enable Gesture Typing is ticked, and youre away.
 
2. Take a screenshot
There are times when you just want to capture whats on your phones screen, so you can keep a record of it or show it to others at a later date, and thankfully this functionality comes baked into Android these days. Simply hold the Volume Down and Power buttons at the same time.

3. Share things instantly with Android Beam
Thanks to the inclusion of a NFC chip inside the Nexus 4, you can share data simply by holding your phone next to a compatible device. If you know someone else with a NFC-packing handset -- such as the Nexus S or the Galaxy Nexus -- you can use this feature to display things directly on their screen. If youre viewing a Web page, for example, or a Google Play listing, you can show your friend by beaming the same page to their device, instantly.

4. Access Quick Settings even more quickly
Android 4.2 boasts a new Quick Settings menu, which can be accessed from the Notifications pane. By dragging the pane down with two fingers however, you jump straight to the Quick Settings option.

5. Take a 360-degree images with Photo Sphere
Panoramic photos are so last year, man. The Nexus 4 can take 360-degree shots, thanks to its unique Photo Sphere option. It takes a while to compose the image as you have to take multiple shots, but the end result is unique to say the least. 

6. Lock screen widgets
Yet another new feature for Android 4.2 is lock screen widgets. From your lock screen you can take photos, browse your emails and check calendar appointments -- all without having to unlock your Nexus 4. This is especially handy if you use a gesture or passcode to secure you phone, as it saves you from having to input it every time you receive an email.

7. Secure your phone with Face Unlock
One of Androids unique functions, Face Unlock allows you to access your device using nothing but your face. To enable it, go to Settings > Security > Screen Lock and select Face Unlock.

8. Type using your voice
Speech-to-text isnt anything new in the world of mobile phones, but its application in Android is possibly the best weve yet seen. Accuracy is very impressive indeed, and text is generated on the fly -- you dont have to wait for the Nexus 4 to convert your speech at the end of each sentence. To access this feature, simply tap the microphone symbol at the bottom of the Android Keyboard.

9. Monitor your battery life
Since Android 4.0, Google fans have enjoyed robust battery monitoring features. By visiting Settings > Battery, you can see how long it has been since your Nexus 4 was last charged and spot processes which are consuming a large amount of power. This allows you to take steps to conserve the juice within the phones 2,100mAh battery, such as dimming your screen or switching off non-essential services.

10. Charge your Nexus 4 without wires
Although its not available yet, the Nexus 4 has its own wireless charging station, which tops up the phones battery using induction charging technology. Thankfully, there are alternatives if youre fed up of waiting for Google and LG to get their collective acts together, such as the Philips Qi Charging Pad.

11. Get traffic reports with Google Now
Google Now is Androids answer to Apples Siri, and is so powerful that it starts offering assistance even if you dont ask it to. Once you opt in to the Google Now experience, it will track your movements and look for patterns. If it sees your regular work trek repeated over a week, it will ask if you wish to mark your place of employment. From that moment onwards, Google Now will offer traffic reports and estimated journey times to and from work, allowing you to plan in advance if you see any potential issues.

12. Make your screen smarter
Screebl is one of the first applications I download whenever I move to a new Android device. It uses your accelerometer to tell when youre holding the phone and looking at the screen, and disables the timeout. This means you dont have to keep prodding the display to prevent it from sleeping if youre reading a web page or other content. When you rest the phone down on a flat surface, Screebl quickly puts the display to bed. Genius.

13. Automatically back up all of your treasured photos
Google+ may not have taken the social networking world by a storm, but the Android application has one fantastic use -- it boasts an option, which allows you to automatically upload photos youve taken on your Nexus 4 to your Google+ account in the cloud. Even if you lose your device, you wont lose all those valuable memories.

14. Expand and collapse notifications
Androids notifications menu has become a pretty powerful feature lately, allowing you to see the contents of individual messages, such as emails or texts. To expand a notification, hold your finger on it and swipe downwards. To collapse, perform the same gesture but after you slide your finger down a little, slide it back up the screen.

15. Tidy up your homescreens
Even with five different homescreens, things can become crowded on your Nexus 4 if youre download-happy. A way of getting around this is to group apps into folders. All you have to do is press and hold down on an app, and then drag and float it over another app -- this will create the folder. Tapping a folder expands it and displays the contents within, and tapping the name of the folder will allow you to give it a more suitable moniker.

16. Silence your phone fast
For those moments when holding down the volume button just isnt a quick enough way of shutting up your phone, you can hold down the Nexus 4s power button briefly to bring up a separate menu. From here you can put your phone into silent or vibrate mode with a single tap, saving your blushes during important meetings.

17. Access your music from the cloud
Google Music is now available in the UK, and the Nexus 4 is the first phone to benefit from this expansion. You can upload your songs using your PC and then access them from the pre-installed Google Music application on your new Nexus phone. If your music doesnt show, check the app settings to ensure that its been synced with your relevant Google account. 

18. View your Google Play library from your homescreen
Introduced with the launch of the Nexus 7 tablet earlier this year, the Google Play library widget gives a snapshot of the most recent movies, music and books youve either purchased or accessed recently. As well as looking rather fetching, it allows you to quickly jump back into content youve enjoyed over the past few days. You can place the widget on any of your five homescreens by selecting it from the Application Drawer.

19. Sync your bookmarks with Google Chrome
The default Android browser has officially been retired in 4.2, and Googles Chrome browser now takes centre stage. If you use Chrome on your desktop (or any other device, for that matter) you can sync your web activity with your Nexus 4.

20. Put your Nexus 4 into a Daydream
Daydream is another new facet of Android 4.2. It allows you to display content on your Nexus4s screen either when its docked or simply charging at the mains. You can have it show a clock, fancy colours, content pulled from your Google Currents account or even a selection of photos.

21. Monitor your data usage
If youre on a contract which stipulates a fair usage policy on your data allowance, then youll want to make use of this feature as much as possible. Go to Settings > Data Usage and youll be shown a graph, as well as a list, of the most data-hungry apps. You can disable apps which you feel are eating too many megabytes, and even set a monthly limit to ensure you never blast over your allowance.

22. Power control
Its one of Androids most useful widgets and should be on every self-respecting owners homescreen -- the Power Control widget allows you to toggle features such as Wi-Fi, Bluetooth, auto-sync and screen brightness, all with a single tap.

23. Add phonetic names to contacts to make voice dialling easier
Even though Androids voice recognition is pretty nifty, it can struggle with names, which could lead to some potentially embarrassing accidental calls when youre using voice dialling. Thankfully, you can now add phonetic names to contacts so voice dialing knows the difference between your mum and Mamas Pizza.

24. Prolong your battery by enabling auto-brightness
When youre using your phone in a darkened room, the brightness of your screen doesnt have to be eye-meltingly intense, so it’s a good idea to switch on auto-brightness. By monitoring the level of light in the room, your Nexus 4 can determine how high luminous the screen needs to be, potentially saving your battery from needless drain.

25. Set applications to auto update
When youve got a shed-load of applications on your Nexus 4, manually installing updates can be a pain. Thankfully, there’s a way of automatically downloading and installing updates without having to lift a finger. Go to the Google Play market and select an app, then check the box which says Allow automatic updating.

How to Factory Reset Nexus 4

Performing a factory reset on Nexus 4 is done when you purchased the tablet second-hand, wiping your apps and starting from scratch or when it’s basically not functioning at all. If you can still get to the tablet’s menu, make sure to back up all necessary documents before you perform hard reset on your device. Here’s how you can do factory reset of your Nexus 4.

1. On your tablet, go to Settings.

2. Under the Personal section, tap on Backup and Reset.

3. Tap on Factory Data Reset and then press on Reset Tablet.

4. If youve set up a password for your device, it will prompt you to enter the said password, pin or pattern. And lastly press Erase Everything to clean out your device.

But if you can’t even get to the menu screen or the device is not functioning at all, you need to do these steps before you can perform factory reset.

1. Turn off the device first if it’s turned on and using a USB cable, connect it to your computer.

2. Press and hold Volume Up, Volume Down and the Power button simultaneously for about 3-4 seconds. This will turn on the device and you’ll see an Android image lying on its back. Wait for your computer to install the drivers before you go to the next step.

3. Using the volume buttons, navigate your device until you reach the Recovery Mode option. Press the Power Button for OK.

4. Your device will restart and will boot to a screen showing an Android with a red triangle. Just press and hold for few seconds the Power Button and Volume up to make the menu screen appear.

5. Now that you’re on the menu options, go to Settings and just follow the steps above to navigate to the Factory Data Reset page using the volume buttons. Use the Volume buttons for YES and the Power button to confirm.

How to Make Your Nexus 4 a WiFi Hotspot

Ever imagine how you can make your own Nexus 4 a WiFi hotspot? Well, sure you can. This feature allows for your other devices to pick up your mobile hotspot settings on your Nexus 4. This is more preferable when you’re in public trying to locate a WiFi connection. You can share your Nexus 4 connection with up to 8 computers or other devices. Check out these steps for easy, convenient and a money-saver internet experience.

1. On your device, head on to Settings

2. Select Wireless and Networks. And tap on More options.

3. Go to Tethering and portable hotspot.

4. And finally check on Portable WiFi hotpost.


Wait for few seconds and your phone will start broadcasting its WiFi network name. Now you’re ready to connect your other device to your portable mobile wifi hotspot.

How to Extend Battery Life of Nexus 4


Battery Life depends on how you use your device. For Google Nexus 4 device, if you want to save your battery to last longer hours, you may need to adjust your settings. Follow these suggestions:

If your Nexus 4 tablet has multiple users, each user can change the global Battery Settings. To control the Battery settings, go to Settings, select Device and tap Battery.

To extend the battery life of your Google Nexus 4, you need to turn off the features that you are not using:

• Turn off the Wi-Fi, Bluetooth, or GPS on settings if not in used so your device will stop searching for a network signal. You can use the Settings app to turn them off. The GPS is located in Settings Personal Location access.

• The Maps or Navigation apps should not be leaved open on the screen. Close the application if not in used.

• Turn down your device volume with the volume keys.

• Lessen the screen brightness and make the Sleep timeout to shorter time. You can adjust the brightness on Settings Device Display

• Turn off the automatic syncing of apps if you dont need it. You can go to Settings Accounts Google account-name.

• If your not in range of a Wi-Fi network, switch your settings to Airplane mode. You can go to Settings Wireless & Networks More > Airplane mode, or press and hold the Power button.

• You should use the latest version of the software update. Software updates improves some features and fixes some bugs on the previous software version.

How to Turn on Screen Magnification on Google Nexus 4

With the advance technology we have these days, there is indeed an improvement of how day-to-day devices are structured. These devices, like mobile phones, can now cater to people with physical challenges especially to blind and deaf ones. Take for example the Google Nexus 4. It has lots of features that can be pretty useful to users with visual impairments. One of which is its screen magnification gestures which aides the readability of fonts and photos on a screen. Heres how to turn on the Screen Magnification feature on Nexus 4.

1.  On your Nexus 4 device, go to Settings. 2. Then go to System and select Accessibility. 3. And lastly go to Magnification Gestures to turn on screen magnification. While you are in Magnification mode you can do these gestures: 1. Pan - just drag two or more fingers across the screen. 2. Adjust Zoom Level - pinch or expand using two or more fingers. 3. Temporarily magnify - triple-tap and hold. 4. Magnify and Pan - triple-tap and hold then drag your finger. 5. Toggle Magnification mode in and out - triple-tap and release or simply enter and exit and app to get out of magnification mode. Take note that the triple-tap magnification gesture will work everywhere on your device except for the keyboard and navigation buttons.

How to Add and Remove an Account on Nexus 4

Synchronizing an account on your Nexus 4 enables you to get quick access on those accounts right on your smartphone. Whether youre adding a Google account or another account like Facebook or Twitter, then you must read this. Take note that in adding some accounts, you may need to obtain certain details from system administrator like the accounts domain or server address. Heres how to add and remove an account on Nexus 4.


To add an account

1. On your devices screen, go to Settings.

2. Then go to Accounts and select Add account.

3. And tap on the kind of account you wish to add on your device. Just follow the on-screen instructions to complete. Most accounts require a username and password depending on the kind of account and the configuration of the service youre connecting to.

4. You may also be asked to configure what kinds of data you want to sync, name the account and other pertinent details.

5. Once youre done adding an account you can view them on:

> For Google Accounts you can view them under Settings Accounts Google.
> For all other accounts you can view them under Settings Accounts.


To remove an account

1. To remove a Google account on your Nexus 4 touch its name under Settings Accounts or Settings Accounts Google, then Menu > finally tap on Remove account.

2. To remove other accounts on your Nexus 4 go to Settings Accounts account-name and look for Remove option.
ReadHere..

Friday, October 24, 2014

Flash the Official SlimKat 4 4 2 Nightly Builds for Samsung Galaxy S4 I9505 Guide

All Galaxy S4 I9505 devices’ users who want to install the latest Official SlimKat custom ROM are now happy to know that the new SlimKat KitKat AOSP 4.4.2 ROM is available for download and install.
The SlimKat custom ROM is a stable one, and it is based on Android 4.4.2 KitKat firmware. If you want to learn more about this ROM you can take a look at SlimROM official web page here.
Prerequistes:
  • During this step by step guide,  we will show you how easily to install the Official SlimKat 4.4.2 Nightly Builds on Samsung Galaxy S4 I9505 device. Note that this guide is for advanced Android users only.
  • This guide is compatible only with Samsung Galaxy S4 LTE model number I9505 device with the Snapdragon 600 the International variant. So by knowing that this step by step guide will not be compatible with the US Galaxy S4 LTE versions of Samsung Galaxy S4 device nor with the I9505 (Exynos) model of the S4 smartphone.
  • The Samsung Galaxy S4 I9505 device has to be a rooted one and to have the latest CWM Recovery Image version installed on it. We don’t test this guide with the TWRP Recovery image.
  • Backup all your data stored into S4 device and create a full NANDROID Backup for the existent installed ROM, this backup will represent a restore point in case you don’t like the new custom ROM or something work wrong.
  • The step by step guide will contain a Factory Reset step that will help the user to apply a clean installation for the new custom ROM.
  • Important: The Factory Reset action will wipe all data from the system partition, but the internal/external storage cards will not be affected by this Factory Reset step.
  • Backup all your application installed on the S4 device, SMS text messages by using the Helium application, a step by step guide about how to do this is available here.
  • Save your contacts from your device, to do this you need to sync contacts info with your Gmail account. Guide here.
  • Ensure that the device’s battery charge level is more that 60 %, this will prevent your device to take a forced power off in the middle of the flashing process.
  • This guide is provided only for educational and instructional provide, so do not blame us in case something wrong is happen by applying this guide on your device, we cannot be held liable or responsible for any data lost or damage of your device during or after the flashing process.
  • Do not skip any steps from this guide.
  • From Developer Option menu, enable the USB Debugging mode. Developer Option, in some cases might be hidden, so you should open the Settings menu, then More and go to About Phone and press Build Number seven times.
  • If you cannot complete this step by step guide, then you can use our comments section for more help.

How to install SlimKat the Official Nightly custom ROM for Galaxy S4 LTE:

  1. Firstly, download the SlimKat custom ROM zip from here, download the latest build available.
  2. Secondly, download Gapps for SlimKat ROM from here.
  3. Now, connect the Samsung Galaxy S4 LTE I9505 device to your computer.
  4. Move (Copy/Paste) the both downloaded zip files to the device’s internal storage. Ensure that you don’t unzip the contents.
  5. Once the both files are copied successfully, disconnect the smartphone from the computer.
  6. Turn off the smartphone now.
  7. Boot the device in CWM or TWRP Recovery Mode. Guide here.
  8. Create the Nandroid ROM backup for your existent ROM. To do this you should select ‘backup and restore’, then give a name to the file and confirm the process.
  9. Apply the Factory Reset, by selecting ‘wipe data/ factory reset’ and confirm. Then you need to use the ‘format /system’ option too.
  10. Next, select ‘install zip from sdcard’, then ‘choose zip from sdcard’ find the ROM file and confirm the installation to install the SlimKat 4.4.2 Weekly custom ROM.
  11. Once the new custom ROM is flashed you need to repeat step 10 actions to flash the Gapps zip file.
  12. After the both files are successfully installed, then you can return to the main Recovery menu.
  13. From the main Recovery menu reboot the smartphone now into normal mode.
  14. The first boot process will takes around five minutes to be done. So, do not press any buttons until the first home screen to appear.
  15. Now, put your Google account info when you’re asked and take control over the phone.
Congratulation, the flashing process is done, now you’ve successfully learned how to install the latest official SlimKat custom ROM on the Galaxy S4 LTE International device.
If the first boot process takes more than 10 minutes, and the main home screen doesn’t appear or the smartphones enters into a boot loop, then you need to repeat the above step by step guide once again.
ReadHere..

Thursday, October 23, 2014

Install I9300XXUGML3 Official Firmware on Galaxy S3 to Android 4 3 Guide

A new firmware is now available for global variant of Galaxy S3 devices; it is about of the new Android 4.3 I9300XXUGML3 Official Firmware.
The new firmware has been released as an OTA (Over-The-Air) update and trough Samsung KIES application (servers) in several regions and countries including Indonesia, Philippines, Malaysia, Vietnam, Singapore and Thailand.
The new update is based on Android 4.3 platform, and its build date is on Dec 26, 2013. Its specifications include PDA: I9300XXUGML3, MODEM: I9300DXUGMK1 and MODEM: I9300DXUGMK1. In Additional, the new update can be flashed on any unlocked Galaxy S3 GT-I9300 devices by using a manually step by step guide. That’s why we will provide you a step by step guide where you’ll teach how easily install the new Android 4.3 I9300XXUGML3 official firmware on Galaxy S3 device.
Pre-requisites and guidelines to follow before to install the new firmware:
  • Android Source Team provide this guide for educational and instructional purpose, so we will not be held liable or responsible for any data lost or damage to the device during or after the ROM installation. Apply this guide only on your own risk.
  • Download and install suitable USB Drivers for Samsung Galaxy S3 device on the PC. Download link for USB Drivers here.
  • Enable the USB Debugging Mode on the smartphone from Settings>Developer Options.
  • A full backup is required to avoid potential data delete or corruption, so backup all your important data stored into Galaxy S3 device’s internal memory.
  • The Galaxy S3 device should be factory unlocked, not locked in any specific carrier.
  • Ensure that the device’s battery has more than 85 % power left.
  • The new official Android 4.3 (I9300XXUGML3) firmware is fully compatible with all Galaxy S3 GT-I9300 devices only. Do not use this firmware in any other incorrect versions of Android devices as it may damage or brick your device.
  • To be sure about the device model verify this by navigating to Settings>>About Phone.

How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:

  1. Download Android 4.3 XXUGML3 JB Firmware for Samsung Galaxy S3 I9300 device.
  2. Download ODIN application from here.
  3. Now, extract the downloaded Android 4.3 JB firmware to obtain a .tar.md5 file and some other additional files.
  4. Now, extract the ODIN archive to get ODIN3 v3.07.exe and some other files.
  5. Turn off the Samsung Galaxy S3 device.
  6. Boot it into Download Mode. (Press and keep holding the Volume Down, Home and Power buttons in the same time until an Android icon with together with a warning triangle will be displayed on the screen and then press once again the Volume UP button).
  7. Open the ODIN application on PC as an Administrator.
  8. Now, by using the USB cable with the device in Download Mode connect the Samsung Galaxy S3 device.
  9. When the ODIN application detects the S3 device a “Added” message will appear on the display and the ID:COM box with the COM port number will turn light blue. If the “Added” message fails to be displayed try to reinstall once again the USB drivers.
  10. Now, load the extracted files in ODIN application from the extractedI9300XXUGML3 firmware folder:
    • ·         From ODIN tap on PDA button and from there select the .tar.md5 file.
    • ·         From ODIN, tap PDA button and select the .tar.md5 file.
    • ·         From ODIN select the CSC button and chose the file named CSC.
    • ·         From ODIN click PIT button and select the file with the .pit extension.
    ·         Note: if the MODEM, CSC and .pit files are not found you should ignore these steps.
  11. In ODIN application select Auto Reboot and F. Reset Time options. The Re-Partition option must rest checked only if you have a .pit file in the previous steps.
  12. Now, verify once again all the steps to be done correctly.
  13. Press on START button in ODIN to start the flashing process.
  14. Once the new official firmware is completely installed a “PASS” message with a green color on the background will be displayed in the left top of ODIN application.
  15. After that the Samsung Galaxy S3 device will get an automatically reboot to the Home screen.
  16. Disconnect the USB cable from the PC.
  17. These were all the steps in order to install the new official Android 4.3 I9300XXUGML3 JB firmware.
  18. Verify the OS version from Settings>About Phone.
Troubleshooting:
If the Samsung Galaxy S3 I9300 device is stuck on the first boot animation you need to:
Boot the device into Recovery Mode by pressing and keep holding the Volume UP and Power buttons in the same times.
From the Recovery Mode perform Wipe data/Factory Reset and Wipe Cache Partition operations.
Return to the main menu of the Recovery Mode and choose Reboot System Now option.
Note: Into Recovery Mode menu you need to use the Volume Keys to navigate between its options and the Power key to select the options that you want to use.
Important: the data wipe task will erase your entire device’s internal memory but not external SD card data.  So by knowing that, you need to ensure that you get a full backup for all your critical data.
ReadHere..

Wednesday, September 24, 2014

UnRoot Manual Update Galaxy S3 I9305 with Official Jellybean 4 1 2 XXBME3 Firmware

 Samsung Galaxy S3 I9305 smartphone can now be un rooted. Once the device is unrooted, the warranty can be reclaimed. Let’s check out on how you can un root the device by applying the official firmware which is released by Samsung. Before we proceed on to check on what are the instructions to apply this firmware update, you need to follow the list of quick pre requisites which we have summed up below. To unroot the device, the simplest process to do is to apply the official firmware update which was rolled out by Samsung Electronics. This firmware which we will be talking about is the official firmware and is dubbed as XXBME3 Jellybean 4.1.2 Firmware.



Quick Pre Requisites:
  • Create a backup of all your data with the help of below mentioned steps. Though, you can back up the data with KIES as well, we recommend you to backup manually with the help of below mentioned steps as sometimes KIES refuses to detect the device.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names
  • From the path “Settings > Development Options > USB debugging” enable the USB Debugging Mode. Minimum charge left in your phone is 30% or else there is a risk of device getting turned off in the middle of rooting process.
Disclaimer: Follow all the instructions mentioned in this article as if there is any damage caused due to not following instructions then we shall not be held liable or responsible. Just in case if you face any issues then we will try our level best to address the same.
Assuming that you are done with all the above mentioned steps, you can now proceed below,  where we have mentioned the detailed guide on how to apply with this firmware update. 


Procedure to Update Galaxy S3 I9305 LTE Smartphone with Jellybean 4.1.2 Firmware:
  • Open Odin in your computer. Download Mode in Galaxy S3 I9305 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.
  • Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.
  • Click on “PDA” to select the tar file which you got from the firmware package which is the TAR File which you got after extracting the file from the first step.
  • Once all the file is selected, click on “Start” to start the process of firmware update. Once the firmware update process is completed which will be mentioned in the ODIN, the Galaxy S2 device will be rebooted.
  • For firmware update to be finished, it will take around 2-3 minutes for applying the update. Once the device is updated successfully, the device will be rebooted. As soon as you see the Language preferences or the Home Screen, you need to disconnect the device from computer and enjoy using your phone.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go, you have now successfully updated your phone with the latest firmware of Jellybean 4.1.2 in your Galaxy S3 LTE I9305 smartphone. Do let us know in the comments section just in case if you face any issues.
ReadHere..

Tuesday, September 23, 2014

Sony XPERIA Ion LT28H Update To Android 4 1 2 Done How To Guide

How To Sony XPERIA Ion LT28H Update To Android 4.1.2 Done Guide
how to install the newest Android 4.1.2 for Sony XPERIA Ion LT28h a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial) b) download and install latest Flashtool from here (mirrors Google Drive or Mega)c) download also latest Android 4.1.2 (mirror) for Sony XPERIA Ion LT28h d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data. f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button g) after few minutes all is done and your phone gets the new firmware
ReadHere..

Monday, September 22, 2014

How to Install Samsung Galaxy S Duos 2 S7582 with Android 4 2 2 DDUANC1 Jelly Bean Official Firmware Using Odin Guide


Samsung Galaxy S Duos 2 (GT-S7582) has already received a new Android 4.2.2 Jelly Bean update with firmware build number S7582DDUANC1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7582DDUANC1
CSC: S7582ODDANC1
MODEM: S7582DDUANC1
Version: Android 4.2.2
Build date: Mar 13, 2014
Regions: India, Bangladesh, Nepal, Sri Lanka
Samsung Galaxy S Duos 2 S7582 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 DDUANC1 Jelly Bean firmware is compatible only with the Galaxy S Duos 2 (GT-S7582). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 DDUANC1 Jelly Bean Firmware (Mirror Link) for Galaxy S Duos 2 S7582
2. Odin 3.07
Steps to Update Galaxy S Duos 2 S7582 with Android 4.2.2 DDUANC1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S Duos 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Select the following files in Odin from extracted S7582DDUANC1 firmware folder:
  • Click the PDA button and select the .tar.md5 file.
  • Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
  • Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
  • Click the PIT button and select the .pit file. Ignore if there is no such file.
Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy S Duos 2 S7582 should be now updated with Android 4.2.2 DDUANC1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy S Duos 2 S7582 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.
Read also: How to Root Galaxy S Duos 2 S7582 on Android 4.2.2 Jelly Bean and Install CWM Recovery
ReadHere..

Wednesday, September 17, 2014

How To Root I535VRUCML1 Verizon Galaxy S3 SCH I535 Android 4 3 JB Firmware

Warning: This tutorial is only for Verizon Galaxy S3 SCH-I535. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:
Though root don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation.

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Verizon Galaxy S3 SCH-I535 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Verizon Galaxy S3 SCH-I535.

5. This method may require a bootloader unlocked device.

How To Root I535VRUCML1 Android 4.3 Jelly Bean On Verizon Galaxy S3 SCH-I535

  1. Download Odin v3.09 and root file for I535VRUCML1.
  2. Extract CF-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Verizon Galaxy S3 SCH-I535 in Download Mode by pressing and holding down the Volume Down, Home and Power button together. A warning Lcd will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button (PDA button for old Odin), and select that CF-Auto-Root-d2vzw-d2vzw-schi535.tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Verizon Galaxy S3 SCH-I535 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just rooted Samsung Verizon Galaxy S3 SCH-I535 running on I535VRUCML1 Android 4.3 Jelly Bean firmware. To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store.
ReadHere..

Friday, September 12, 2014

Medusa Box v2 0 4 Samsung i337 LG P659 and more!


Medusa Box v2.0.4 is out!

Added support for:
Samsung SGH-I337, LG P659, P655H, Pantech UM175AL and Huawei E176


Medusa Box v2.0.4 Release Notes:

- Added support for the following models:

  • Samsung SGH-I337 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).
  • LG P659 - added Dead Boot/Device Repair.
  • LG P655H - added Dead Boot/Device Repair.
  • Pantech UM175AL - added Dead Boot/Device Repair.
  • Huawei E176 - added Dead Boot/Device Repair (thanks to Mr. Dr_Wolodya).

- Added new Core ID (207210E1) for MSM8930 CPU.
- Added new Core ID (220700E1) for MSM6800 CPU.
- All pinouts and repair procedures are described in software manuals ("Help" button in software).


Medusa - your ultimate source of solid solutions in mobile resurrection business!


Download Medusa Box v2.0.4
ReadHere..

Friday, September 5, 2014

Nokia X3 02 KEYPAD MALFUNCTION KEY ERROR CALL 1 4 7

NOKIA X3-02
PRODUCT: RM-639
PROBLEM
KEYPAD MALFUNCTION
KEY ERROR = CALL / 1 / 4 / 7
ACTION TAKEN
DISMATLE X3-02
REMOVED KEYPAD iC
JUMPER KEYPAD iC
JUMPER SOLUTION FOR NOKIA X3-02



5431a87304x3
AFTER JUMPER KEYPAD iC STILL NO LUCK!!!
NEXT STEP….
TRACE KUNG MERON LINYANG PUTOL
NANGHIRAM AKO NG DEAD NA X3-02 SA KAPATID NATING MUSLIM
THANKS TO BOSS DEN NA SYANG NAGPAHIRAM SAKIN NG K-FLEX
OK SA ISANG FLEX.. AYUN MERON NGA PUTOL NA LINYA!!!



3ca4d351a302



32156c8f1602
SOLVED!!!


83840add0b02



6c011d01363
FINISH PRODUCT!!!



889ad189e83

ReadHere..

Tuesday, September 2, 2014

How to Easily Root Android 4 4 1 on Nexus 10 KOT49E KitKat and Install CWM TWRP Recovery

Hi friends welcome to this humble blog, well this time I, as the operator will take you to a reading that would be useful for Klian natinya, just go ahead. Google Nexus 10 recently started to update Android 4.4.1 OTA Kitkat with the latest version of the build KOT49E.

Note: You can manually download the OTA for Nexus 10 directly from Google Server Update and follow the step-by-step guide to install the update manually.

Nexus 10 users who have updated their devices with Android 4.4.1 KOT49E KitKat, can root their devices using the tutorial below.

Disclaimer: Rooting your device voids the warranty. Our developers and rooting procedure is not responsible if there are undesirable results can occur on your device. use this guide to root solely at your own risk!

How To Root Nexsus 10 KOT49E

Pre-requisites
1. Make a backup of all your important data before the follow-up guide.
2. Enable USB Debugging mode on the tablet. Go to Settings >> About Phone. Press the Build number several times until the message shows "You are now a Developer". Out of the "About Phone" and find "Developer Options" setting. Enable USB debugging.
3. The Nexus 10 bootloader must be unlocked.
4. Make sure the battery is charged more than 80 tablets per cent.
5. The CWM / TWRP Recovery and SuperSU files are only compatible with the Nexus 10. Applying this to every one variant that will brick the device. Verify the model number of the Nexus 10 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 10 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Step 1
: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 10 runs on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer from the Nexus 10 and looking for an application called SuperSU. Verify the status of the root device by downloading the Root Checker app from Google Play Store.

And terimaksih have followed the above alloy ..
ReadHere..

Monday, August 25, 2014

How to Easy Root Galaxy S4 Canadian SGH I337M on Android 4 3 Jelly Bean Firmware

Samsung yang baru saja mulai meluncurkan Android 4.3 Jelly Bean mengupdate dengan firmware build number I337MVLUEMK6 untuk versi Kanada dari Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. Firmware baru resmi yang saat ini tersedia sebagai Over-The-Air (OTA) mengupdate serta melalui Samsung Kies.

Samsung Galaxy S4 (Kanada) user SGH-I337M yang telah diperbarui perangkat mereka dengan Android 4.3 Jelly Bean, dapat membasmi perangkat mereka menggunakan tutorial di bawah ini.

Tutorial ini menggunakan CF-Auto-Root berkas dirilis oleh Elite Diakui XDA Developers, Chainfire. File CF-Auto-Root yang memungkinkan pengguna Galaxy S4 untuk root dalam perangkat mereka kemudahan dalam tanpa beda menurut firmware. Ini benar-benar dukungan Android 4.3 Jelly Bean dan firmware mendatang sekaligus.



Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)

Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
ReadHere..

Monday, August 18, 2014

How to update Samsung Galaxy S4 to Jellybean 4 2 2

Helo... survived fun, Before we get into how her first requirements you must meet in order to upgrade its got the right maximum results, either directly, yes the one we see alticel below ...

For all those users who have purchased attractive handset Samsung galaxy S4 have the option to upgrade their phones with the latest version Android Jellybean 4.2.2 firmware dubbed as XXUAMDM . One of the main benefits of a firmware update is that he was able to fix bugs on a regular basis in the app by scanning the Samsung Hub , as evidenced by recent reports of error " 999 " in their handsets . Also some problems with the integration of the Samsung Account has been fixed with this update .

There is a detailed procedure is available in the demo section further wherein the user needs to do all the pre -requisites listed below . And also , do not forget , this is the first update for S4 I9505 Galaxy smartphones from Samsung Electronics .

Note : When applying this firmware do not unplug the device in any aspect and manually upgrade is very much recommended . This firmware can be applied in every country location , regardless of any country because it is an official firmware released by Samsung.

Terms updates Samsung Galaxy S4 GT I9505 to 4.2.2 Jellybean

  • All files on the phone Samsung S4 needs to be backed up manually and not via the PC Suite.
  • SMS can be backed up via the "SMS Backup & Restore app".
  • Contacts can be backed up by synchronizing and transferring them to the Gmail app.
  • Call logs can be backed up via the "Call Log and Restore" app.
  • Images, songs, videos and other important files can be transferred safely to SD memory cards Internal / External.
  • APN and MMS Settings - Applications -> Settings> Wireless and Network -> Mobile Networks -> Access Point Names.
  • The next step Settings-> Applications-> Development-> USB debugging "mode to enable USB Debugging.
  • There should be adequate power in the handset to avoid hansdset dead in the middle of the routing process. The expected minimum power in the device is 30%.
Important: The steps listed above are mandatory and must be strictly adhered to by the user who      will perform the upgrade before the start of the rooting process to avoid any kind of ambiguity.          Any deviation from the requirements in following the above steps, will result in serious                         consequences and manufacturer Samsung is not responsible for this.

Once you have completed all the steps above requirements, let us turn to the detailed procedure to upgrade the firmware of Samsung handsets S4 XXUAMDM.


  • Procedure to Update Galaxy S4 XXUAMDM I9505 with Jellybean 4.2.2 Firmware : Have you mendownlod two applications to upgrade the Firmware 4.2.2 Jellybean at this address : http://www.hotfile.com/dl/204771041/f3c594c/I9505XXUAMDM_I9505OXAAMDM_DBT.zip.html and one lago Odin here : https:// hotfile.com/dl/196702311/668088d/Odin307.zip.html . Both applications installed on each computer after downloading it .
  • Furthermore , you can open the Odin on their PC and restart your Samsung handset S4 , so Odin set to S4 in download mode .
  • Odin can complete the download to shut down Galaxy S4 and then simultaneously hold the Volume Down Rocker Key + Menu button and then Switch ON handset . Once the download is complete , the download appears as Green Robot menu where you can release your fingers from the key pair
  • Then you will need to connect your phone to your PC via USB cable accordingly. Once this operation is complete , you can visually see the ID : COM section in the Yellow or Green flashing , showing condition loaded successfully .
  • Now , you need to click on the PDA to select the tar file , which will be acquired as a result of the extraction of the firmware update in the first step .
  • Click " Start" to begin the firmware update process . Once the firmware is updated successfully , the device will automatically reboot within 2 -3 minutes . Reboot the whole process will take about 3-4 minutes . After the boot device and the home screen is displayed , you can disconnect the device from the computer .
  • You can check if the device is rebooted or not , by downloading the app " Root Checker " from the Google Store .

Note: If your device into a boot loop sequence or can be said to be stuck on the screen "welcome", Have you re-insert the battery and follow the instructions on the back so it can no longer follow the instructions mentioned above.

Well, that was the way Samsung galaxy S4 Upgrade to Android 4.2.2 Jellybean manually as recommended by the Samsung. And for your Samsung galaxy S3 users who want to upgrade to Android 4.2.2 Jellybean, please you read the tutorial on: How To Install Samsung galaxy S3 I9300 to 4.2.2 Jellybean
ReadHere..

How to Install N900PVPUBMJ4 4 3 Jelly Bean Firmware On SMN900P Sprint Galaxy Note 3

Sprint Samsung Galaxy Note 3 BC-N900P (USA) users can now update their devices to Android 4.3 firmware VPUBMJ4 official Jelly Bean which is being launched by Samsung. The latest firmware version N900PVPUBMJ4 built. The device that was released with Android 4.3 Jelly Bean and has been getting regular firmware updates. If you still need to update your device then update the latest official firmware N900PVPUBMJ4 Android 4.3 Jelly Bean on Sprints Galaxy Note 3. You can check the latest firmware available for your device via OTA (over the air) on your phone settings, go to Settings-General-About-Software Update.

For Samsung Galaxy Note 3 N900P comes with Android 4.3 Jelly Bean, you can only expect some additional bug fixes and performance improvements in this update. It is always recommended to update your device to the latest firmware when available.

If you do not already know, Android 4.3 Jelly Bean is equipped with many new features of Android Jelly Bean as the previous 4.2.2 Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control features for application such as mobile phones, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New Samsung keyboard, Changed the icon for a few Samsung apps, Fine TouchWiz, display Adapt, Adapt voice, full-screen mode in Samsung apps and more.


So, want to update to the Galaxy Note 3 N900P VPUBMJ4 latest firmware Android 4.3 Jelly Bean? There are two official ways to update the firmware, both check and update via OTA as mentioned above or download and update via Samsung Kies utility. However, if youre looking for a manual way to update the latest firmware VPUBMJ4 Android 4.3 on the Galaxy Note 3 N900P via Odin, then follow the step by step tutorial.

Important Note:
"
The firmware is released only for the Samsung Galaxy Note 3 SM-N900P model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean N900PVPUBMJ4 Official Firmware Download List


Pre-Requisites:


  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N900PVPUBMJ4 official firmware on Galaxy Note 3 N900P.
How to Update Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 N900P via Odin:

  1. Download Android 4.3 VPUBMJ4 Firmware for Galaxy Note 3 N900P from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Note 3 N900P into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900P to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: N900PXXDLJ5_N900PODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have done. Hope you successfully complete tutorial to update the firmware of Android 4.3 Jelly Bean officially VPUBMJ4 on Galaxy Note 3 BC-N900P. If youve followed everything in the tutorial as mentioned above, then your device should now be running on the latest Android 4.3 Jelly Bean VPUBMJ4 build version. You can verify the details of the firmware update from the Settings-General-About. If you have any questions, please feel free to contact with us using the comment form below and also share how you found the tutorial.
ReadHere..