Showing posts with label on. Show all posts
Showing posts with label on. Show all posts
Thursday, December 11, 2014
Way to Jailbreak iPhone 4 On iOS 5 1 With Redsnow Mac OS X
This tutorial will help you to jailbreak your iPhone 4 using Redsnow . First of all i tell you that it is tethered jailbreak so you have to connect your iPhone with Mac computer and re-run redsnow to boot your iPhone 4 into fully operational state every time your iphone loses power. I am also telling you that this jaolbreak will not work on iPhone 4S and that iBooks will not work correctly until iPhone Dev-Team implement a patch that will fix this.
To jailbreak follow these steps .
Step 1: To get started you will need to( download RedSn0w 0.9.1
0b6) on your Mac
Step 2: Once download process is completed start RedSn0w 0.9.10b6 launcher and click Jailbreak button located in middle of your window
Step 3: When the next window shows up, connect your iPhone 4 with your Mac using USB cable and power off your iPhone.
Step 4: When you are ready click Next button in existing window which will start DFU mode process
Step 5: When you click Next button simply follow instructions inside redsn0w window and continue clicking Next, after every step you perform on your iPhone (those steps you can find below)
- Hold down the Power (corner) button for 3 seconds
- Without releasing the Power button, also hold down the Home (bottom center) button for 10 seconds
- Without releasing the Home button, release the Power button BUT KEEP holding the Home button for 15 seconds
Step 6: After you have successfully entered in DFU mode with your iPhone 4, redsn0w will begin preparing your iPhone 4 for the Jailbreak
Step 7: Once redsn0w is finished preparing your iPhone 4 for Jailbreak a new window will show up where you need to specify options to go along with Jailbreak. You can specify any option you want but I suggest you to choose only Install Cydia and click Next
Step 8: Once you click next the Jailbreak process will begin, DO NOT interrupt this process and wait until it’s finished. When jailbreak process is finished iPhone will boot up and stuck at Apple logo. If this happens to you it’s because this is a tethered jailbreak and you will need to boot tethered with redsn0w in order to make your iPhone work.
Step 9: To boot your iPhone using redsn0w lunch redsn0w again and click Extras button and then choose Just bootbutton
Step 10: After that you will simply need to put your iPhone into DFU mode again.
Thursday, November 20, 2014
How to receive pictures by text message on HTC Droid
The HTC Droid Incredible is integrated with the Android smartphone operating system . In addition to various functions of software and hardware, has a high capacity usage data , which enables you to access the Internet, check your email and take advantage of MMS services. An MMS message is a message with an attached media and if you get one with a picture attached , you see it or download it easily just now.How to receive pictures by text message on HTC Droid
Tips and Warnings
ReadHere..
- Go to the " Start" Lcd, press the button that says "Start " button below the Lcd with the image of a house.
- Click " Applications" in the lower left corner of the Lcd and select " Messages" .
- Tap the message to open MMS .
- You can view or download the attachment. To view simply click the attachment and wait a minute. To download on your storage card, press and hold the name or number of the sender to display the options for that message. Click " Save [ attachment type ] " and after downloading the attachments , you can see them in the "Gallery " application .
Tips and Warnings
- If you have your Droid Incredible configured to automatically notify you when you arrive and MMS text messages , you can open the message directly instead of locating in the tray of "messages " . The notification icon appears in the status bar at the top of the Lcd. Just press the status bar and swipe down the Lcd, then tap the notification to open the message .
- To view or download attachments you use your phone s data plan. You can always see the size of the attachment on the MMS message before really download it.
Tuesday, November 18, 2014
nokia n82 power on off button switch jumper ways
Heres the alternative way to apply jumper when the power switch solder terminal pads is being damaged on Nokia N82.
Just follow and trace the line paths shown on the solution below.
Just trace and apply a tiniest magnetic jumper wire on the spots shown of the above solution.
ReadHere..
Just follow and trace the line paths shown on the solution below.
Nokia N82 power ON OFF button Switch Jumper Ways
Saturday, November 15, 2014
Nokia C7 power On Off Track Ways Jumper Solution
Nokia C7 power On Off Track Ways Jumper Solution
Friday, November 7, 2014
Nokia C7 power On Off Track Ways Jumper Solution
Nokia C7 power On Off Track Ways Jumper Solution
Thursday, October 23, 2014
Install I9300XXUGML3 Official Firmware on Galaxy S3 to Android 4 3 Guide
A new firmware is now available for global variant of Galaxy S3 devices; it is about of the new Android 4.3 I9300XXUGML3 Official Firmware.
The new firmware has been released as an OTA (Over-The-Air) update and trough Samsung KIES application (servers) in several regions and countries including Indonesia, Philippines, Malaysia, Vietnam, Singapore and Thailand.
The new update is based on Android 4.3 platform, and its build date is on Dec 26, 2013. Its specifications include PDA: I9300XXUGML3, MODEM: I9300DXUGMK1 and MODEM: I9300DXUGMK1. In Additional, the new update can be flashed on any unlocked Galaxy S3 GT-I9300 devices by using a manually step by step guide. That’s why we will provide you a step by step guide where you’ll teach how easily install the new Android 4.3 I9300XXUGML3 official firmware on Galaxy S3 device.
Pre-requisites and guidelines to follow before to install the new firmware:
- Android Source Team provide this guide for educational and instructional purpose, so we will not be held liable or responsible for any data lost or damage to the device during or after the ROM installation. Apply this guide only on your own risk.
- Download and install suitable USB Drivers for Samsung Galaxy S3 device on the PC. Download link for USB Drivers here.
- Enable the USB Debugging Mode on the smartphone from Settings>Developer Options.
- A full backup is required to avoid potential data delete or corruption, so backup all your important data stored into Galaxy S3 device’s internal memory.
- The Galaxy S3 device should be factory unlocked, not locked in any specific carrier.
- Ensure that the device’s battery has more than 85 % power left.
- The new official Android 4.3 (I9300XXUGML3) firmware is fully compatible with all Galaxy S3 GT-I9300 devices only. Do not use this firmware in any other incorrect versions of Android devices as it may damage or brick your device.
- To be sure about the device model verify this by navigating to Settings>>About Phone.
How to update Samsung Galaxy S3 with Android 4.3 I9300XXUGML3 Jelly Bean Firmware:
- Download Android 4.3 XXUGML3 JB Firmware for Samsung Galaxy S3 I9300 device.
- Download ODIN application from here.
- Now, extract the downloaded Android 4.3 JB firmware to obtain a .tar.md5 file and some other additional files.
- Now, extract the ODIN archive to get ODIN3 v3.07.exe and some other files.
- Turn off the Samsung Galaxy S3 device.
- Boot it into Download Mode. (Press and keep holding the Volume Down, Home and Power buttons in the same time until an Android icon with together with a warning triangle will be displayed on the screen and then press once again the Volume UP button).
- Open the ODIN application on PC as an Administrator.
- Now, by using the USB cable with the device in Download Mode connect the Samsung Galaxy S3 device.
- When the ODIN application detects the S3 device a “Added” message will appear on the display and the ID:COM box with the COM port number will turn light blue. If the “Added” message fails to be displayed try to reinstall once again the USB drivers.
- Now, load the extracted files in ODIN application from the extractedI9300XXUGML3 firmware folder:
- · From ODIN tap on PDA button and from there select the .tar.md5 file.
- · From ODIN, tap PDA button and select the .tar.md5 file.
- · From ODIN select the CSC button and chose the file named CSC.
- · From ODIN click PIT button and select the file with the .pit extension.
· Note: if the MODEM, CSC and .pit files are not found you should ignore these steps.- In ODIN application select Auto Reboot and F. Reset Time options. The Re-Partition option must rest checked only if you have a .pit file in the previous steps.
- Now, verify once again all the steps to be done correctly.
- Press on START button in ODIN to start the flashing process.
- Once the new official firmware is completely installed a “PASS” message with a green color on the background will be displayed in the left top of ODIN application.
- After that the Samsung Galaxy S3 device will get an automatically reboot to the Home screen.
- Disconnect the USB cable from the PC.
- These were all the steps in order to install the new official Android 4.3 I9300XXUGML3 JB firmware.
- Verify the OS version from Settings>About Phone.
Troubleshooting:
If the Samsung Galaxy S3 I9300 device is stuck on the first boot animation you need to:
Boot the device into Recovery Mode by pressing and keep holding the Volume UP and Power buttons in the same times.
From the Recovery Mode perform Wipe data/Factory Reset and Wipe Cache Partition operations.
Return to the main menu of the Recovery Mode and choose Reboot System Now option.
Note: Into Recovery Mode menu you need to use the Volume Keys to navigate between its options and the Power key to select the options that you want to use.
Important: the data wipe task will erase your entire device’s internal memory but not external SD card data. So by knowing that, you need to ensure that you get a full backup for all your critical data.
Thursday, September 25, 2014
How to Share Content with DLNA Certified Devices on Sony Xperia Z1 Compact
Playing files from DLNA Certified™ devices on your device
When you play files from another DLNA Certified™ device on your device, this other device acts as a server. In other words, it shares content over a network. The server device must have its content sharing function enabled and give access permission to your device. It also must be connected to the same Wi-Fi® network as your device.
To play a shared track on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap
, then find and tap WALKMAN.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the track that you want to play. The track starts playing automatically.
To play a shared video on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap, then find and tap Movies.
3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the video that you want to play.
To view a shared photo on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap.
3. Find and tap Album > My albums. All your available online albums and connected devices are displayed.
4. Select a device from the list of connected devices.
5. Browse the folders of the connected device and select a photo to view it.
Preparing to play content from your device on DLNA Certified™ devices
You must set up file sharing on your device first before you can view or play media files from other DLNA Certified devices. Your device works as a media server when it makes content available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.
To stop sharing files with other DLNA Certified™ devices
1. From your Home Lcd, tap.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
To set access permissions for a pending device
1. From your Home Lcd, tap.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Pending devices list.
4. Select an access permission level.
To change the name of a registered device
1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list, then select Change name.
4. Enter a new name for the device.
To change the access level of a registered device
1. From your Home Lcd, tap.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list.
4. Tap Change access level and select an option.
To get help about sharing content with other DLNA Certified™ devices
1. From your Home Lcd, tap.
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Tap Question mark icon.
ReadHere..
When you play files from another DLNA Certified™ device on your device, this other device acts as a server. In other words, it shares content over a network. The server device must have its content sharing function enabled and give access permission to your device. It also must be connected to the same Wi-Fi® network as your device.
To play a shared track on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap
, then find and tap WALKMAN.3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the track that you want to play. The track starts playing automatically.
To play a shared video on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap
, then find and tap Movies.3. Select a device from the list of connected devices.
4. Browse the folders of the connected device and select the video that you want to play.
To view a shared photo on your device
1. Make sure the devices that you want to share files with are connected to the same Wi-Fi® network as your device.
2. From your Home Lcd, tap
.3. Find and tap Album > My albums. All your available online albums and connected devices are displayed.
4. Select a device from the list of connected devices.
5. Browse the folders of the connected device and select a photo to view it.
Preparing to play content from your device on DLNA Certified™ devices
You must set up file sharing on your device first before you can view or play media files from other DLNA Certified devices. Your device works as a media server when it makes content available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.
To stop sharing files with other DLNA Certified™ devices
1. From your Home Lcd, tap
.2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
To set access permissions for a pending device
1. From your Home Lcd, tap
.2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Pending devices list.
4. Select an access permission level.
To change the name of a registered device
1. From your Home Lcd, tap .
2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list, then select Change name.
4. Enter a new name for the device.
To change the access level of a registered device
1. From your Home Lcd, tap
.2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Select a device from the Registered devices list.
4. Tap Change access level and select an option.
To get help about sharing content with other DLNA Certified™ devices
1. From your Home Lcd, tap
.2. Find and tap Settings > Xperia™ Connectivity > Media server settings.
3. Tap Question mark icon.
Thursday, September 18, 2014
How to Import Contacts from SIM Card on Huawei Ascend Y210
Contacts is very important for everyone of us. We cant connect to our friends without a contact number. If you have a new phone, saving contacts on the phone one by one is so hassle. But if you have save your contacts on a Sim Card, then you can transfer your contacts from your SIM Card to your Huawei Ascend Y210.
Follow these steps on how to import contacts from SIM Card:
1. On the contact list Lcd, tap on the 3-horizontal icon.
2. Then select Manage Contacts.
3. Tap Copy from SIM card. (Make sure that your SIM card is inserted on your phone.)
4. Touch one contact to individually import, or tap Select All to import all your contacts.
5. Then tap Copy.
Note: If you have more than one account on your phone, tap on the account you want to import the contacts.
Follow these steps on how to import contacts from SIM Card:
1. On the contact list Lcd, tap on the 3-horizontal icon.
2. Then select Manage Contacts.
3. Tap Copy from SIM card. (Make sure that your SIM card is inserted on your phone.)
4. Touch one contact to individually import, or tap Select All to import all your contacts.
5. Then tap Copy.
Note: If you have more than one account on your phone, tap on the account you want to import the contacts.
Sunday, September 14, 2014
Nokia 1202 1661 ON OFF Way Solution
if you check it much give few comments about this so that others can learn form your comments also.
If you have any other Questions please do not hesitate to share with me.
Wednesday, September 10, 2014
Blackberry 9000 red light not on dead solution
Blackberry 9000 red light not on dead solution, blackberry not working phone dead solution many time water damage phone not on dead solution have ,blackberry power switch not working solution blackberry power switch jumper way tested solution blackberry 9000 not power switch working solution .this phone after not working i have solution 1st try all board reheat and 2nd not done see my post daigrem i hope solve your phone dead problem and if u need many blackberry tested solution .
see this ic this ic work your dead phone solved 1st try reheat not working 2nd change this i hope solved your problem
Tuesday, September 9, 2014
How to Move Contacts and Files From Your Old Phone on Motorola Moto G
Transferring contacts and files on Motorola Moto G is now made easier by using the free app Motorola Migrate. You can easily transfer all your photos, music, text, contact and even your call history. You just need to download the app on the link.
ReadHere..
Nokia 2700c usb line not detected on Computer Solution
Nokia 2700c usb line not detected solution. Just Replace it 100% Working
ReadHere..
Tuesday, September 2, 2014
How to Easily Root Android 4 4 1 on Nexus 10 KOT49E KitKat and Install CWM TWRP Recovery
Hi friends welcome to this humble blog, well this time I, as the operator will take you to a reading that would be useful for Klian natinya, just go ahead. Google Nexus 10 recently started to update Android 4.4.1 OTA Kitkat with the latest version of the build KOT49E.
Note: You can manually download the OTA for Nexus 10 directly from Google Server Update and follow the step-by-step guide to install the update manually.
Nexus 10 users who have updated their devices with Android 4.4.1 KOT49E KitKat, can root their devices using the tutorial below.
Disclaimer: Rooting your device voids the warranty. Our developers and rooting procedure is not responsible if there are undesirable results can occur on your device. use this guide to root solely at your own risk!
 |
| How To Root Nexsus 10 KOT49E |
Pre-requisites
1. Make a backup of all your important data before the follow-up guide.
2. Enable USB Debugging mode on the tablet. Go to Settings >> About Phone. Press the Build number several times until the message shows "You are now a Developer". Out of the "About Phone" and find "Developer Options" setting. Enable USB debugging.
3. The Nexus 10 bootloader must be unlocked.
4. Make sure the battery is charged more than 80 tablets per cent.
5. The CWM / TWRP Recovery and SuperSU files are only compatible with the Nexus 10. Applying this to every one variant that will brick the device. Verify the model number of the Nexus 10 by navigating to Settings >> About Phone.
File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version
Steps to Root Nexus 10 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:
fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img
Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".
Nexus 10 runs on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer from the Nexus 10 and looking for an application called SuperSU. Verify the status of the root device by downloading the Root Checker app from Google Play Store.
And terimaksih have followed the above alloy ..
Saturday, August 30, 2014
How to Uninstall and Reinstall Apps on Motorola Moto G
From your home screen touch Apps, then swipe left to scroll through apps. To close the apps screen, touch Home or Back.
• Uninstall apps: Touch Apps > Settings > Apps. Swipe left to ALL, touch an app, then touch Disable or Uninstall in the top right (if available).
Disable removes the app from your menu—to Enable it, reopen this window and touch Enable (disabled apps are at the bottom of the list).
If an app locks up your phone as soon as you turn it on, restart in Safe Mode: Turn off your phone, then turn it back on—when you see the “Motorola” logo during power-up, press and hold both volume keys until you see the home screen, with Safe Mode in the lower left. Then, try removing the app.
• Reinstall apps: To reinstall apps from Google Play Store, touch Apps > Play Store > Menu > My apps. The apps you downloaded are listed and available for download.
• Share, show, or clear app details: Touch Apps > Settings > Apps. A bar at the bottom tells you how much app storage space you have left. Swipe left or right to see the list of DOWNLOADED, RUNNING, or ALL apps, then touch an app in the list to show its details and storage usage. You can touch Clear data, Clear cache, or other options.
Tip: To quickly show these app details from your app screen: Touch and hold an app, then drag it to App info.
• Show app data usage: To show which apps are using the most data, touch Apps > Settings > Data usage. For more, see “Data use”.
ReadHere..
• Uninstall apps: Touch Apps > Settings > Apps. Swipe left to ALL, touch an app, then touch Disable or Uninstall in the top right (if available).
Disable removes the app from your menu—to Enable it, reopen this window and touch Enable (disabled apps are at the bottom of the list).
If an app locks up your phone as soon as you turn it on, restart in Safe Mode: Turn off your phone, then turn it back on—when you see the “Motorola” logo during power-up, press and hold both volume keys until you see the home screen, with Safe Mode in the lower left. Then, try removing the app.
• Reinstall apps: To reinstall apps from Google Play Store, touch Apps > Play Store > Menu > My apps. The apps you downloaded are listed and available for download.
• Share, show, or clear app details: Touch Apps > Settings > Apps. A bar at the bottom tells you how much app storage space you have left. Swipe left or right to see the list of DOWNLOADED, RUNNING, or ALL apps, then touch an app in the list to show its details and storage usage. You can touch Clear data, Clear cache, or other options.
Tip: To quickly show these app details from your app screen: Touch and hold an app, then drag it to App info.
• Show app data usage: To show which apps are using the most data, touch Apps > Settings > Data usage. For more, see “Data use”.
Monday, August 25, 2014
How to Easy Root Galaxy S4 Canadian SGH I337M on Android 4 3 Jelly Bean Firmware
Samsung yang baru saja mulai meluncurkan Android 4.3 Jelly Bean mengupdate dengan firmware build number I337MVLUEMK6 untuk versi Kanada dari Galaxy S4 (SGH-I337M) - Rogers, Bell, Telus, Virgin Mobile, Koodo, Fido, SaskTel. Firmware baru resmi yang saat ini tersedia sebagai Over-The-Air (OTA) mengupdate serta melalui Samsung Kies.
Samsung Galaxy S4 (Kanada) user SGH-I337M yang telah diperbarui perangkat mereka dengan Android 4.3 Jelly Bean, dapat membasmi perangkat mereka menggunakan tutorial di bawah ini.
Tutorial ini menggunakan CF-Auto-Root berkas dirilis oleh Elite Diakui XDA Developers, Chainfire. File CF-Auto-Root yang memungkinkan pengguna Galaxy S4 untuk root dalam perangkat mereka kemudahan dalam tanpa beda menurut firmware. Ini benar-benar dukungan Android 4.3 Jelly Bean dan firmware mendatang sekaligus.
Head over to the CF-Auto-Root main thread to learn more about the root method.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Canadian version of the Galaxy S4 with model number SGH-I337M. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.
Files Required
1. CF-Auto-Root for Galaxy S4 (Canadian) SGH-I337M (CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip)
2. Odin 3.07
Steps to Root Galaxy S4 (Canadian) SGH-I337M Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select theCF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy S4 (Canadian) SGH-I337M running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Monday, August 18, 2014
How to Install N900PVPUBMJ4 4 3 Jelly Bean Firmware On SMN900P Sprint Galaxy Note 3
Sprint Samsung Galaxy Note 3 BC-N900P (USA) users can now update their devices to Android 4.3 firmware VPUBMJ4 official Jelly Bean which is being launched by Samsung. The latest firmware version N900PVPUBMJ4 built. The device that was released with Android 4.3 Jelly Bean and has been getting regular firmware updates. If you still need to update your device then update the latest official firmware N900PVPUBMJ4 Android 4.3 Jelly Bean on Sprints Galaxy Note 3. You can check the latest firmware available for your device via OTA (over the air) on your phone settings, go to Settings-General-About-Software Update.
For Samsung Galaxy Note 3 N900P comes with Android 4.3 Jelly Bean, you can only expect some additional bug fixes and performance improvements in this update. It is always recommended to update your device to the latest firmware when available.
If you do not already know, Android 4.3 Jelly Bean is equipped with many new features of Android Jelly Bean as the previous 4.2.2 Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control features for application such as mobile phones, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New Samsung keyboard, Changed the icon for a few Samsung apps, Fine TouchWiz, display Adapt, Adapt voice, full-screen mode in Samsung apps and more.
So, want to update to the Galaxy Note 3 N900P VPUBMJ4 latest firmware Android 4.3 Jelly Bean? There are two official ways to update the firmware, both check and update via OTA as mentioned above or download and update via Samsung Kies utility. However, if youre looking for a manual way to update the latest firmware VPUBMJ4 Android 4.3 on the Galaxy Note 3 N900P via Odin, then follow the step by step tutorial.
"The firmware is released only for the Samsung Galaxy Note 3 SM-N900P model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Android 4.3 Jelly Bean N900PVPUBMJ4 Official Firmware Download List
- USA (Sprint): N900PVPUBMJ4 N900PSPTBMJ4_SPR.zip | Link2
Pre-Requisites:
- Check battery percentage, your device should have at least 60% battery power
- Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
- Backup important data and settings to external storage- follow this guide
- Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
- If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
- Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
- After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N900PVPUBMJ4 official firmware on Galaxy Note 3 N900P.
How to Update Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 N900P via Odin:
- Download Android 4.3 VPUBMJ4 Firmware for Galaxy Note 3 N900P from the above list
- Download Odin 3.07
- Switch off your phone and boot Galaxy Note 3 N900P into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy Note 3 N900P to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: N900PXXDLJ5_N900PODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Congrats! you have done. Hope you successfully complete tutorial to update the firmware of Android 4.3 Jelly Bean officially VPUBMJ4 on Galaxy Note 3 BC-N900P. If youve followed everything in the tutorial as mentioned above, then your device should now be running on the latest Android 4.3 Jelly Bean VPUBMJ4 build version. You can verify the details of the firmware update from the Settings-General-About. If you have any questions, please feel free to contact with us using the comment form below and also share how you found the tutorial.
Friday, August 15, 2014
Nokia 5230 No lcd Light On Display Solution 100 Tested
Nokia 5230 Lcd light solution.Nokia 5230 No light Screen Solution 100% Tested By Me Just Replace It one by one on Red Colour parts Details Show on Diagram .
ReadHere..
Subscribe to:
Posts (Atom)