Showing posts with label lcd. Show all posts
Showing posts with label lcd. Show all posts
Thursday, December 11, 2014
Monday, November 24, 2014
Nokia 1202 1203 LCD Repair
Hello friends, after a long time I did not post a trick jumpers, now Im back to share a trick jumpers that may be useful for you. Jumper trick this time is to repair the broken lines on the LCD Nokia 1202 and Nokia 1203.
Please save this images as your reference material if someday you find a problem on LCD Nokia 1202 and Nokia 1203.
Please save this images as your reference material if someday you find a problem on LCD Nokia 1202 and Nokia 1203.
Monday, November 17, 2014
Nokia Asha 303 Display LCD Light Solution By Jumper
In nokia Asha 303 lcd light problem display led light problem, display light not working can be solve in a few easy steps that are posted in this post. So read it carefully and see diagram bellow to solve light problem in nokia Asha 303 lcd display:
Check lcd jack and lcd jack on board clean them with electronics cleaner and leave it to dry under electrical bulb or apply some hot air so that it can be dry. Check these two links shown in diagram with different colors and if any of them is broken then please make jumpers to solve light problem in nokia Asha 303.
Sunday, November 16, 2014
Saturday, November 15, 2014
Nokia 5030 White screen and Blue Blank LCD Display solution
Heres a solution to solved Nokia 5030 xpressradio Display problems such as White Screen, Blue scree, blank Lcd, black Lcd and any related display failures.
This solution shows the display line tracks connection from a certain components to the LCD pin connector.
The display data signals is feed from the application processor then each line is filtered by resistor before it gets through to the LCD module.
This solution shows the display line tracks connection from a certain components to the LCD pin connector.
5030 LCD display problem solution (display jumper ways)
Friday, November 14, 2014
Nokia C2 06 Lcd Display Problem Solution Ways Jumpers
Nokia C2-06 Blank Lcd Display, Nokia C2-06 White Lcd Display, Nokia C2-06 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Tools:-
To solve lcd display problem in Nokia C2-06 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-06
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.
Diagnosting & Solution:
After disassemble of Nokia C2-06 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, November 13, 2014
Nokia C1 01 LCD Screen Display Problem Jumper Ways Solution
Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesnt turns ON and shows a dark display.
Nokia 111 LCD Display Problem Ways Jumpers
Nokia 111 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 111 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.
![]( "Nokia")
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
ReadHere..
remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Monday, November 3, 2014
Nokia 2730c LCD Display Problem Solution with jumper ways
Heres a Nokia 2730c LCD Display Problem Solution with jumper ways and connection tracks, that may help solve display problems like, blank or empty screen display, blue screen display, white blinking screen display, saturated or garbled screen display.
If encountered such display problem on Nokia 2730c, you must first try to install a new replacement LCD screen module and update the device flash firmware. Ensure also that the LCD pin connector is not damaged or lifted.
The above solution shows the LCD display connection line paths from the LCD pin connector to a corresponding resistor components near the application processor chip. These resistors has a resistance value of 33 ohms each. You must also check and then replace this resistors if found damaged to obtain the display signal data that feeds to the LCD Screen module. The LCD data signals were generated from the CPU chip and then feeds to these resistors before it goes through to the LCD screen.
If encountered such display problem on Nokia 2730c, you must first try to install a new replacement LCD screen module and update the device flash firmware. Ensure also that the LCD pin connector is not damaged or lifted.
Nokia 2730c LCD Screen Display Connection Jumper Ways and Tracks
The above solution shows the LCD display connection line paths from the LCD pin connector to a corresponding resistor components near the application processor chip. These resistors has a resistance value of 33 ohms each. You must also check and then replace this resistors if found damaged to obtain the display signal data that feeds to the LCD Screen module. The LCD data signals were generated from the CPU chip and then feeds to these resistors before it goes through to the LCD screen.
Wednesday, October 29, 2014
Nokia C5 06 Display Problem Lcd Solution Jumpers
If you have display problem, White or blank display, Lcd problem in Nokia C5-06. All these problems can be sort out and to be fix with a few tips and diagnostics that I am going to write in this post.nokia Asha 202 Camera Problem Solution Jumper Ways
A diagram to repair Nokia C5-06 display problem is also attached with this post as above.After dis assembly of Nokia C5-06 try to replace lcd. If lcd replacement can not solve display problem in Nokia C5-06.
Check all these tracks that are given in above Display repairing diagram for Nokia C5-06. These different color lines are identifying the paths and components that are used in display function of Nokia C5-06.
Check all these parts with meter and if any of them is missing or damage apply jumpers as given in above diagram for Nokia C5-06 blank lcd white display or no display solution.
This diagram is sent to us by one of our guest poster and it is taken from gem-flash a gsm portal.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
ReadHere..
A diagram to repair Nokia C5-06 display problem is also attached with this post as above.After dis assembly of Nokia C5-06 try to replace lcd. If lcd replacement can not solve display problem in Nokia C5-06.
Check all these tracks that are given in above Display repairing diagram for Nokia C5-06. These different color lines are identifying the paths and components that are used in display function of Nokia C5-06.
Check all these parts with meter and if any of them is missing or damage apply jumpers as given in above diagram for Nokia C5-06 blank lcd white display or no display solution.
This diagram is sent to us by one of our guest poster and it is taken from gem-flash a gsm portal.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Wednesday, October 22, 2014
Blackberry Bold 9000 LED Light LCD jumber ways Solution
Blackberry Bold 9000 lcd light lcd jumper ways solution many time water damage phone light not working phone i have this problem 100% working solution see my solution step by step i think solved your phone blackberry bold 9000 led problem only jumper done
see
Blackberry 9900 cellular phone usb repair solution
see this problem blackberry bold 9000 solution without ic only jumper done 100% working many time tested by me see this and try to jumper working 100% and dont forget visit my blog.
Friday, October 17, 2014
Nokia X2 05 Lcd Display Jumper Ways Problem Solution
Nokia X2-05 No display solution, Nokia X2-05 LCD problem solution, Nokia X2-05 Lcd jumper ways, Nokia X2-05 white and blank display lcd. All these problems can be due to water damages. Carbon and burn parts of the smartphone.nokia X2-02 Not Charging Problem Solution Jumper Ways
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Remove old LCD and Check it with new one. In above diagram you can see some different color lines that are pointing to the parts which are used in Display function of Nokia X2-05.
Check all these parts with help of meter and apply jumpers as shown in above diagram to solve display problem in Nokia X2-05.
If you find some broken and missing components then apply jumper on points where small circles given in nokia lcd problem solution.
After disassambly of Nokia X2-05 look at the motherboard for rust carbon or burren parts. If you found some rust or carbon apply electronics cleaner on the mother board and apply hot air to make it dry proper.
Applying too much heat can damage the mother board and parts.It also can be harm for your skin.So keep in mind about normal heat flow when making it dry.
Remove old LCD and Check it with new one. In above diagram you can see some different color lines that are pointing to the parts which are used in Display function of Nokia X2-05.
Check all these parts with help of meter and apply jumpers as shown in above diagram to solve display problem in Nokia X2-05.
If you find some broken and missing components then apply jumper on points where small circles given in nokia lcd problem solution.
Friday, September 12, 2014
Asha 203 Asha 202 LCD Ways how to fix problem
This article is for Nokia Asha 203 and Nokia Asha 202 LCD Problem Solution. It applies to both of these phones.
In Nokia Asha 202 LCD Problem can occur because of the faulty LCD Connector. So first of all you should clean LCD connector and the general area on the motherboard around it. If that does not work replace it but also make sure the LCD is not busted or broken. I have marked all the Nokia Asha 202 LCD Connector Ways in this diagram. I have marked all the LCD connector legs with different colors to avoid confusion. The Black marks indicate those points are negative.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further Questions please dont hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Monday, September 1, 2014
Nokia C2 00 Lcd Keypad Light Jumper Ways Solution
Saturday, August 30, 2014
Monday, August 25, 2014
Sunday, August 24, 2014
Thursday, August 21, 2014
Samsung Galaxy S LCD Screen Display Problem Hardware Solution
The solution below covers for Samsung Galaxy S I9000 with display problem cause by water or wet damaged.
This may only works if already tried installing or replacing the whole LCD screen module and calibrating the device ROM but nothing happens.
This is the phones history before the LCD screen display goes wrong: "accidentally dropped in the toilet bowl" by the user. The phone still powers ON but the LCD display is empty or blank but still can hear tones.
Action taken:
1. Disassemble the phone then clean it by using a liquid cleaner and dries up.
2. Tried replacing or using another LCD screen, but still no luck.
3. Visually check the LCD pin connector then re-solder it.
4. Replace the Display filter ICs. Problem solved.
See pictures below: The pink encircled components are display filters, if damaged will result to LCD screen display problem of Samsung Galaxy S I9000.
This may only works if already tried installing or replacing the whole LCD screen module and calibrating the device ROM but nothing happens.
This is the phones history before the LCD screen display goes wrong: "accidentally dropped in the toilet bowl" by the user. The phone still powers ON but the LCD display is empty or blank but still can hear tones.
Action taken:
1. Disassemble the phone then clean it by using a liquid cleaner and dries up.
2. Tried replacing or using another LCD screen, but still no luck.
3. Visually check the LCD pin connector then re-solder it.
4. Replace the Display filter ICs. Problem solved.
See pictures below: The pink encircled components are display filters, if damaged will result to LCD screen display problem of Samsung Galaxy S I9000.
We have replace it all, but we only found out that only one chip display filter is faulty or damaged. Hope this helps and serve as a little bit information!
Subscribe to:
Posts (Atom)